AM500004V6 Ver la hoja de datos (PDF) - Tyco Electronics
Número de pieza
componentes Descripción
Fabricante
AM500004V6 Datasheet PDF : 5 Pages
| |||
High Dynamic Range Low Noise Amplifier
1400 - 2000 MHz
Recommended PCB Configuration
Layout View
AM50-0004
V6
Cross Section View
RF Traces & Components
RF Ground
DC Routing
Customer Defined
The PCB dielectric between RF traces and RF ground layers should be
chosen to reduce RF discontinuities between 50 Ω lines and package
pins. M/A-COM recommends an FR-4 dielectric thickness of .008” (0.20
mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended
RF metalization is 1 ounce copper.
Designer’s Kit AM50-0004SMB
The AM50-0004SMB Designer’s Kit allows for immediate evaluation of M/A-COM’s AM50-0004. The Designer’s
Kit includes an AM50-0004 mounted on an evaluation board and five loose AM50-0004’s. The evaluation board
consists of the recommended external surface mount circuitry, RF connectors, and a DC multi-pin connector, all
mounted to a multi-layer FR-4 PCB. The AM50-0004SMB evaluation PCB is illustrated below with all functional
ports labeled.
AM50-0004 Evaluation Board
Evaluation PCB & RF Connector Losses
Port Reference
RF In
RF Out
Approximate RF Loss
0.15 dB @ 1785 MHz
0.15 dB @ 1785 MHz
The DC connector on the Designer’s Kit PCB allows convenient
DC line access. This is accomplished by the one or more of the
following methods.
1. A mating female multi-pin connector (Newark Electronics
Stock # 46F-4658, not included).
2. Wires soldered to the necessary pins (not included).
3. Clip leads (not included).
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 