AM500004V6 Ver la hoja de datos (PDF) - Tyco Electronics
Número de pieza
componentes Descripción
Fabricante
AM500004V6 Datasheet PDF : 5 Pages
| |||
High Dynamic Range Low Noise Amplifier
1400 - 2000 MHz
Features
• Low Noise Figure: 1.4 dB
• High Input IP3: +18 dBm at 8 V, 45 mA bias
+8 dBm at 3 V, 20 mA bias
• High Gain: 14 dB
• Single Supply: +3 to +8 VDC
• Low Cost SOIC-8 Plastic Package
• Adjustable current: 20 to 60 mA with external
resistor
Description
M/A-COM’s AM50-0004 is a high dynamic range,
GaAs MMIC, low noise amplifier in a low cost, SOIC
8-lead, surface mount, plastic package. It employs
external input matching to obtain optimum noise
figure performance and operating frequency
flexibility. The AM50-0004 also features flexible
biasing to control the current consumption vs.
dynamic range trade-off. The AM50-0004 can
operate from any positive supply voltage in the 3 V
to 8 V range. Its current can be controlled over a
range of 20 mA to 60 mA with an external resistor.
The AM50-0004 is ideally suited for use where low
noise figure, high gain, high dynamic range, and low
power consumption are required. Typical
applications included receiver front ends in PDC,
DCS-1800, DCS-1900 and other PCN/PCS base
stations. It is also useful as a gain block, buffer,
driver, and IF amplifier in both fixed or portable PDC
and PCN/PCS systems.
The AM50-0004 is fabricated using a low-cost 0.5-
micron gate length GaAs process. The process
features full passivation for increased performance
and reliability. The AM50-0004 is 100% RF tested
to ensure performance specification compliance.
Ordering Information
Part Number
AM50-0004
AM50-0004TR
AM50-0004SMB
Package
Bulk Packaging
1000 piece reel
Designer’s Kit
Note: Reference Application Note M513 for reel size
information.
1
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
AM50-0004
V6
Functional Block Diagram
GND
REXT
RF IN
GND
GND
VDD
RF OUT
GND
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
Pin Name
GND
REXT
RF IN
GND
GND
RF OUT
VDD
GND
Description
RF and DC Ground
External Current Control
(optional)
RF Input of the amplifier
RF and DC Ground
RF and DC Ground
RF Output of the amplifier
Positive supply voltage
RF and DC Ground
Absolute Maximum Ratings 1,2
Parameter
VDD
Input Power
Current3
Channel Temperature4
Operating Temperature
Storage Temperature
Absolute Maximum
+10 VDC
+17 dBm
80 mA
+150°C
-40°C to +85°C
-65°C to +150°C
1. Exceeding any one or combination of these limits may cause
permanent damage.
2. M/A-COM does not recommend sustained operation near
these survivability limits.
3. When pin #2 is used to increase current. (See note 7.)
4. Thermal resistance (θjc) = +99°C/W.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 