AM29LV116DT-70 Ver la hoja de datos (PDF) - Advanced Micro Devices

Número de pieza

componentes Descripción

Fabricante

AM29LV116DT-70

16 Megabit (2 M x 8-Bit) CMOS 3.0 Volt-only Boot Sector Flash Memory

Advanced Micro Devices 

DATA SHEET

Am29LV116D

16 Megabit (2 M x 8-Bit)

CMOS 3.0 Volt-only Boot Sector Flash Memory

This product has been retired and is not recommended for designs. For new designs, S29AL016D supersedes Am29LV116D. Please refer to the S29AL016D data sheet for specifications

and ordering information. Availability of this document is retained for reference and historical purposes only.

DISTINCTIVE CHARACTERISTICS

• Single power supply operation

— 2.7 to 3.6 volt read and write operations for

battery-powered applications

• Manufactured on 0.23 µm process technology

— Compatible with and replaces Am29LV116B

device

• High performance

— Access times as fast as 70 ns

• Ultra low power consumption (typical values at

5 MHz)

— 200 nA Automatic Sleep mode current

— 200 nA standby mode current

— 9 mA read current

— 15 mA program/erase current

• Flexible sector architecture

— One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and

thirty-one 64 Kbyte sectors

— Supports full chip erase

— Sector Protection features:

A hardware method of locking a sector to prevent

any program or erase operations within that sector

Sectors can be locked in-system or via

programming equipment

Temporary Sector Unprotect feature allows code

changes in previously locked sectors

• Unlock Bypass Program Command

— Reduces overall programming time when issuing

multiple program command sequences

n Top or bottom boot block configurations

available

• Embedded Algorithms

— Embedded Erase algorithm automatically

preprograms and erases the entire chip or any

combination of designated sectors

— Embedded Program algorithm automatically

writes and verifies data at specified addresses

• Minimum 1,000,000 write cycle guarantee

per sector

• 20-year data retention at 125°C

— Reliable operation for the life of the system

• Package option

— 40-pin TSOP

• CFI (Common Flash Interface) compliant

— Provides device-specific information to the

system, allowing host software to easily

reconfigure for different Flash devices

• Compatibility with JEDEC standards

— Pinout and software compatible with single-

power supply Flash

— Superior inadvertent write protection

• Data# Polling and toggle bits

— Provides a software method of detecting program

or erase operation completion

• Ready/Busy# pin (RY/BY#)

— Provides a hardware method of detecting

program or erase cycle completion

• Erase Suspend/Erase Resume

— Suspends an erase operation to read data from,

or program data to, a sector that is not being

erased, then resumes the erase operation

• Hardware reset pin (RESET#)

— Hardware method to reset the device to reading

array data

This Data Sheet states AMD’s current technical specifications regarding the Product described herein. This Data

Sheet may be revised by subsequent versions or modifications due to changes in technical specifications.

Publication# 21359 Rev: E Amendment: 5

Issue Date: September 12,2006

Share Link: