AKD5358-B Ver la hoja de datos (PDF) - Asahi Kasei Microdevices

Número de pieza

componentes Descripción

Fabricante

AKD5358-B

AK5358 Evaluation Board Rev.0

Asahi Kasei Microdevices 

ASAHI KASEI

[AKD5358-B]

(2) Master Mode

(2-1) A/D evaluation using DIT function of AK4114

PORT2 (DIT) is used. DIT generates audio bi-phase signal from received data and which is output through

optical connector (TOTX141). It is possible to connect AKM’s D/A converter evaluation boards on the

digital-amplifier, which equips DIR input. Nothing should be connected to PORT1 (DSP). The DIF1 of SW1

(MODE) should be set to “H”.

JP5

MCLK

(2-2) Master clock is fed externally.

PORT1 (DSP) is used. MCLK is provided to the AK5358 through PORT1. JP5 (MCLK) should be open. The

DIF1 of SW1 (MODE) should be set to “H”.

JP5

MCLK

„ Other jumper pins set up

1. JP1 (GND) : Analog ground and Digital ground

OPEN : Separated.

SHORT : Common. (The connector “DGND” can be open.) <Default>

2. JP2 (CKS1) : Setting of CKS1 pin for AK5358

H : Master mode

L : Slave mode <Default>

3. JP3 (VA) : Select VA for AK5358

VA : Supply from VA connector <Default>

REG : Supply from regulator. VA connector should be supplied +15V.

4. JP4 (VD) : Select VD for AK5358

VA : Supply from VA connector

VD : Supply from VD connector <Default>

<KM079501>

-3-

2005/09

Share Link: