Features
AH288
HIGH VOLTAGE HALL-EFFECT SMART FAN MOTOR
CONTROLLER
General Description
• On chip Hall sensor
• Rotor-locked shutdown
• Automatically restart
• Frequency generator (FG) output
• Built-in Zener protection for output driver
• Operating voltage: 3.8V~28V
• Output current: IO(AVE) = 400mA
• Lead Free Finish/RoHS Compliant for Lead Free
products (Note 1)
• Lead Free Packages: SIP-5L and SOT89-5L
AH288 is a monolithic fan motor controller with Hall sensor’s
capability. It contains two complementary open-drain transistors
as motor coil drivers, automatic lock current shutdown, and
recovery protections. Additional, frequency generator (FG) output
is for speed detection relatively.
Rotor-lock shutdown detection circuit turns off the output driver
when the rotor is blocked to avoid coil overheat. Then, the
automatic recovery circuit will restart the motor. These protected
actions are repeated and periodic during the blocked period. Until
the blocking is removed, the motor recovers and runs normally.
Ordering Information
AH288 - X X X
Package
P: SIP-5L
Y: SOT89-5L
Lead
L : Lead Free
Packing
-B : Bulk
-13 : Taping
Note: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7.
Device
Package Packaging
Code
(Note 2)
Tube/Bulk
Quantity Part Number Suffix
7” Tape and Reel
Quantity
Part Number Suffix
AH288-P
P
Lead-free
AH288-Y
Y
Lead-free
SIP-5
SOT89-5
1000
NA
-B
NA
NA
NA
2500/Tape & Reel
-13
Note: 2. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
AH288 Rev. 4
1 of 10
www.diodes.com
JANUARY 2007
© Diodes Incorporated