ADP151
Data Sheet
PIN CONFIGURATIONS AND FUNCTION DESCRIPTIONS
VIN 1
5 VOUT
ADP151
GND 2 TOP VIEW
(Not to Scale)
EN 3
4 NC
NC = NO CONNECT
1
2
A VIN
VOUT
TOP VIEW
(Not to Scale)
B EN
GND
Figure 4. 5-Lead TSOT Pin Configuration
Figure 5. 4-Ball WLCSP Pin Configuration
VOUT 1
NC 2
GND 3
ADP151
TOP VIEW
(Not to Scale)
6 VIN
5 NC
4 EN
NOTES
1. NC = NO CONNECT. DO NOT CONNECT TO THIS PIN.
2. THE EXPOSED PAD MUST BE CONNECTED TO GROUND.
Figure 6. 6-Lead LFCSP Pin Configuration
Table 5. Pin Function Descriptions
Pin No.
TSOT WLCSP LFCSP Mnemonic
1
A1
6
VIN
2
B2
3
GND
3
B1
4
EN
4
N/A
2
5
A2
1
N/A
N/A
5
N/A
N/A
NC
VOUT
NC
EPAD
Description
Regulator Input Supply. Bypass VIN to GND with a 1 µF or greater capacitor.
Ground.
Enable Input. Drive EN high to turn on the regulator; drive EN low to turn off the regulator.
For automatic startup, connect EN to VIN.
No Connect. Not connected internally.
Regulated Output Voltage. Bypass VOUT to GND with a 1 µF or greater capacitor.
No Connect. Not connected internally.
Exposed Pad. The exposed pad must be connected to ground. The exposed pad enhances
the thermal performance of the package.
Rev. E | Page 6 of 24