ADNS-5030 Ver la hoja de datos (PDF) - Avago Technologies

Número de pieza

componentes Descripción

Fabricante

ADNS-5030

Low Power Optical Mouse Sensor

Avago Technologies 

Overview of Optical Mouse Sensor Assembly

Avago Technologies provides an IGES file drawing de-

scribing the base plate molding features for lens and

PCB alignment.

The ADNS-5030 sensor is designed for mounting on a

through-hole PCB, looking down. There is an aperture

stop and features on the package that align to the lens.

The ADNS-5100/5100-001 lens provides optics for the

imaging of the surface as well as illumination of the

surface at the optimum angle. Features on the lens align

it to the sensor, base plate, and clip with the LED.

The ADNS-5200 clip holds the LED in relation to the lens.

The LED must be inserted into the clip and the LED’s leads

formed prior to loading on the PCB.

The HLMP-ED80 LED is recommended for illumination.

Figure 3. Recommended PCB mechanical cutouts and spacing.



Share Link: