ADL5363 Ver la hoja de datos (PDF) - Analog Devices

Número de pieza

componentes Descripción

Fabricante

ADL5363

2300 MHz to 2900 MHz Balanced Mixer, LO Buffer and RF Balun

Analog Devices 

ADL5363

5 V PERFORMANCE

VS = 5 V, IS = 100 mA, TA = 25°C, fRF = 2535 MHz, fLO = 2738 MHz, LO power = 0 dBm, VGS0 = VGS1 = 0 V, and ZO = 50 Ω, unless

otherwise noted.

Table 3.

Parameter

Test Conditions/Comments

Min Typ

DYNAMIC PERFORMANCE

Power Conversion Loss

Including 1:1 IF port transformer and PCB loss

7.7

SSB Noise Figure

7.6

Input Third-Order Intercept (IIP3)

fRF1 = 2534.5 MHz, fRF2 = 2535.5 MHz, fLO = 2738 MHz,

31

each RF tone at 0 dBm

Input Second-Order Intercept (IIP2)

fRF1 = 2535 MHz, fRF2 = 2585 MHz, fLO = 2738 MHz,

62

each RF tone at 0 dBm

Input 1 dB Compression Point (IP1dB)1 Exceeding 20 dBm RF power results in damage to the device

25

LO-to-IF Leakage

Unfiltered IF output

−22

LO-to-RF Leakage

−32

RF-to-IF Isolation

−44

IF/2 Spurious

−10 dBm input power

−61

IF/3 Spurious

−10 dBm input power

−70

POWER SUPPLY

Positive Supply Voltage

4.5 5

Quiescent Current

VS = 5 V

100

Max Unit

dB

dB

dBm

dBm

dBm

dBm

dBm

dBc

dBc

dBc

5.5 V

mA

1 Exceeding 20 dBm RF power results in damage to the device.

3.3 V PERFORMANCE

VS = 3.3 V, IS = 60 mA, TA = 25°C, fRF = 2535 MHz, fLO = 2738 MHz, LO power = 0 dBm, R9 = 226 Ω, VGS0 = VGS1 = 0 V, and ZO = 50 Ω,

unless otherwise noted.

Table 4.

Parameter

DYNAMIC PERFORMANCE

Power Conversion Loss

SSB Noise Figure

Input Third-Order Intercept (IIP3)

Input Second-Order Intercept (IIP2)

POWER SUPPLY

Positive Supply Voltage

Quiescent Current

Test Conditions/Comments

Including 1:1 IF port transformer and PCB loss

fRF1 = 2534.5 MHz, fRF2 = 2535.5 MHz, fLO = 2738 MHz,

each RF tone at 0 dBm

fRF1 = 2535 MHz, fRF2 = 2585 MHz, fLO = 2738 MHz,

each RF tone at 0 dBm

VS = 5 V

Min Typ

7.4

6.8

26

56

Max Unit

dB

dB

dBm

dBm

3.3

V

60

mA

Rev. 0 | Page 4 of 24

Share Link: