ADL5363 Ver la hoja de datos (PDF) - Analog Devices

Número de pieza

componentes Descripción

Fabricante

ADL5363

2300 MHz to 2900 MHz Balanced Mixer, LO Buffer and RF Balun

Analog Devices 

2300 MHz to 2900 MHz Balanced Mixer,

LO Buffer and RF Balun

ADL5363

FEATURES

RF frequency range of 2300 MHz to 2900 MHz

IF frequency range of dc to 450 MHz

Power conversion loss: 7.7 dB

SSB noise figure of 7.6 dB

Input IP3 of 31 dBm

Typical LO drive of 0 dBm

Single-ended, 50 Ω RF and LO input ports

High isolation SPDT LO input switch

Single-supply operation: 3.3 V to 5 V

Exposed pad, 5 mm × 5 mm 20-lead LFCSP

1500 V HBM/1250 V FICDM ESD performance

APPLICATIONS

Cellular base station receivers

Transmit observation receivers

Radio link downconverters

GENERAL DESCRIPTION

The ADL5363 uses a highly linear, doubly balanced passive

mixer core along with integrated RF and local oscillator (LO)

balancing circuitry to allow for single-ended operation. The

ADL5363 incorporates an RF balun to provide optimal

performance over a 2300 MHz to 2900 MHz input frequency

range. The balanced passive mixer arrangement provides good

LO-to-RF leakage, typically better than −30 dBm, and excellent

intermodulation performance. The balanced mixer core also

provides extremely high input linearity, allowing the device to

be used in demanding cellular applications where in-band

blocking signals might otherwise result in the degradation of

dynamic performance.

FUNCTIONAL BLOCK DIAGRAM

VCMI

20

IFOP

19

IFON

18

PWDN

17

COMM

16

VPMX 1

ADL5363

15 LOI2

RFIN 2

14 VPSW

RFCT 3

COMM 4

BIAS

GENERATOR

13 VGS1

12 VGS0

COMM 5

11 LOI1

6

7

8

9

10

VLO3

LGM3

VLO2

LOSW

NC

NC = NO CONNECT

Figure 1.

The ADL5363 provides two switched LO paths that can be used

in TDD applications where it is desirable to rapidly switch between

two local oscillators. LO current can be externally set using a

resistor to minimize dc current commensurate with the desired

level of performance. For low voltage applications, the ADL5363 is

capable of operation at voltages down to 3.3 V with substantially

reduced current. For low voltage operation, an additional logic

pin is provided to power down (<200 μA) the circuit when desired.

The ADL5363 is fabricated using a BiCMOS high performance

IC process. The device is available in a 5 mm × 5 mm, 20-lead

LFCSP and operates over a −40°C to +85°C temperature range.

An evaluation board is also available.

Table 1. Passive Mixers

Single

RF Frequency (MHz) Mixer

500 to 1700

ADL5367

1200 to 2500

ADL5365

2300 to 2900

ADL5363

Single Mixer

and IF Amp

ADL5357

ADL5355

ADL5353

Dual Mixer

and IF Amp

ADL5358

ADL5356

ADL5354

Rev. 0

Information furnished by Analog Devices is believed to be accurate and reliable. However, no

responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other

rights of third parties that may result from its use. Specifications subject to change without notice. No

license is granted by implication or otherwise under any patent or patent rights of Analog Devices.

Trademarks and registered trademarks are the property of their respective owners.

One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.

Tel: 781.329.4700

www.analog.com

Fax: 781.461.3113

©2011 Analog Devices, Inc. All rights reserved.

Share Link: