ADA4062-2ARZ-RL Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Fabricante
ADA4062-2ARZ-RL Datasheet PDF : 20 Pages
| |||
ABSOLUTE MAXIMUM RATINGS
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage
Input Current
Output Short-Circuit Duration to GND
Storage Temperature Range
Operating Temperature Range
Junction Temperature Range
Lead Temperature (Soldering, 60 sec)
Rating
±18 V
±VSY
±VSY
±10 mA
Indefinite
−65°C to +150°C
−40°C to +125°C
−65°C to +150°C
300°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ADA4062-2/ADA4062-4
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages. It was
measured using a standard 4-layer board.
Table 4. Thermal Resistance
Package Type
θJA
θJC
8-Lead SOIC
120
45
8-Lead MSOP
142
45
10-Lead LFCSP
132
46
14-Lead TSSOP
112
35
16-Lead LFCSP
75
12
Unit
°C/W
°C/W
°C/W
°C/W
°C/W
POWER SEQUENCING
The supply voltages of the op amps must be established
simultaneously with, or before, any input signals are applied. If
this is not possible, the input current must be limited to 10 mA.
ESD CAUTION
Rev. B | Page 5 of 20
Share Link: 