AD8363ACPZ-WP(Rev0) Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Fabricante
AD8363ACPZ-WP Datasheet PDF : 36 Pages
| |||
AD8363
SPECIFICATIONS
VPOS = 5 V, TA = 25°C, ZO = 50 Ω, single-ended input drive, VOUT connected to VSET, VTGT = 1.4 V, CLPF = 3.9 nF, CHPF = 2.7 nF, error
referred to best-fit line (linear regression) from −20 dBm to −40 dBm, unless otherwise noted. Negative current values imply that the
AD8363 is sourcing current out of the indicated pin.
Table 1.
Parameter
Conditions
Min Typ
Max Unit
OVERALL FUNCTION
Maximum Input Frequency
6
GHz
RF INPUT INTERFACE
INHI (Pin 14), INLO (Pin 15), ac-coupled
Input Resistance
Single-ended drive
50
Ω
Common-Mode DC Voltage
2.6
V
100 MHz
TCM1 (Pin 16) = 0.47 V, TCM2 (Pin 1) = 1.0 V, INHI input
Output Voltage: High Power In PIN = −10 dBm
2.47
V
Output Voltage: Low Power In PIN = −40 dBm
0.92
V
±1.0 dB Dynamic Range
CW input, TA = 25°C
65
dB
Maximum Input Level, ±1.0 dB
9
dBm
Minimum Input Level, ±1.0 dB
−56
dBm
Deviation vs. Temperature
Deviation from output at 25°C
−40°C < TA < +85°C; PIN = −10 dBm
−0.2/+0.3
dB
−40°C < TA < +85°C; PIN = −40 dBm
−0.5/+0.6
dB
Logarithmic Slope
51.7
mV/dB
Logarithmic Intercept
−58
dBm
Deviation from CW Response 13 dB peak-to-rms ratio (W-CDMA), over 40 dB dynamic range
<±0.1
dB
12 dB peak-to-rms ratio (WiMAX), over 40 dB dynamic range
<±0.1
dB
14.0 dB peak-to-rms ratio (16C CDMA2K), over 40 dB dynamic
<±0.1
dB
range
256 QAM, CF = 8 dB, over 40 dB dynamic range
<±0.1
dB
Input Impedance
Single-ended drive
49 − j0.09
Ω
900 MHz
TCM1 (Pin 16) = 0.5 V, TCM2 (Pin 1) = 1.2 V, INHI input
Output Voltage: High Power In PIN = −15 dBm
2.2
V
Output Voltage: Low Power In PIN = −40 dBm
0.91
V
±1.0 dB Dynamic Range
CW input, TA = 25°C
54
dB
Maximum Input Level, ±1.0 dB
−2
dBm
Minimum Input Level, ±1.0 dB
−56
dBm
Deviation vs. Temperature
Deviation from output at 25°C
−40°C < TA < +85°C; PIN = −15 dBm
+0.6/−0.4
dB
−40°C < TA < +85°C; PIN = −40 dBm
+0.8/−0.6
dB
Logarithmic Slope
51.8
mV/dB
Logarithmic Intercept
−58
dBm
Deviation from CW Response 13 dB peak-to-rms ratio (W-CDMA), over 40 dB dynamic range
<±0.1
dB
12 dB peak-to-rms ratio (WiMAX), over 40 dB dynamic range
<±0.1
dB
14.0 dB peak-to-rms ratio (16C CDMA2K), over 40 dB dynamic
<±0.1
dB
range
256 QAM, CF = 8 dB, over 40 dB dynamic range
<±0.1
dB
Input Impedance
Single-ended drive
60 − j3.3
Ω
Rev. 0 | Page 3 of 36
Share Link: 