AD827A(RevB) Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Fabricante
AD827A Datasheet PDF : 8 Pages
| |||
AD827
Model
OUTPUT RESISTANCE
POWER SUPPLY
Operating Range
Quiescent Current
TRANSISTOR COUNT
Conditions
VS
Open Loop
AD827J
Min Typ Max
15
AD827A/S
Min Typ Max
15
Units
Ω
TMIN to TMAX
TMIN to TMAX
±5 V
± 15 V
± 4.5
± 18
10 13
16
10.5 13.5
16.5
92
± 4.5
± 18
V
10 13
mA
16.5/17.5 mA
10.5 13.5
mA
17/18
mA
92
NOTES
1Offset voltage for the AD827 is guaranteed after power is applied and the device is fully warmed up. All other specifications are measured using high speed test equip-
ment, approximately 1 second after power is applied.
2Full Power Bandwidth = Slew Rate/2 π VPEAK.
3Gain = +1, rising edge.
All min and max specifications are guaranteed.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 18 V
Internal Power Dissipation2
Plastic (N) Package (Derate at 10 mW/°C) . . . . . . . . 1.5 W
Cerdip (Q) Package (Derate at 8.7 mW/°C) . . . . . . . . 1.3 W
Small Outline (R) Package (Derate at 10 mW/°C) . . . 1.5 W
LCC (E) Package (Derate at 6.7 mW/°C) . . . . . . . . . 1.0 W
Input Common Mode Voltage . . . . . . . . . . . . . . . . . . . . . . ± VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . 6 V
Output Short Circuit Duration3 . . . . . . . . . . . . . . . . Indefinite
Storage Temperature Range (N, R) . . . . . . . –65°C to +125°C
Storage Temperature Range (Q) . . . . . . . . . –65°C to +150°C
Operating Temperature Range
AD827J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to +70°C
AD827A . . . . . . . . . . . . . . . . . . . . . . . . . . . –40°C to +85°C
AD827S . . . . . . . . . . . . . . . . . . . . . . . . . . –55°C to +125°C
Lead Temperature Range
(Soldering to 60 sec) . . . . . . . . . . . . . . . . . . . . . . . +300°C
NOTES
1Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only, and functional
operation of the device at these or any other conditions above those indicated in the
operational section of this specification is not implied. Exposure to absolute
maximum ratings for extended periods may affect device reliability.
2Maximum internal power dissipation is specified so that TJ does not exceed
+175°C at an ambient temperature of +25°C.
Thermal Characteristics:
Mini-DIP: θJA = 100°C/Watt; θJC = 33°C/ Watt
Cerdip: θJA = 110°C/Watt; θJC = 30°C/Watt
16-Pin Small Outline Package: θJA = 100°C/Watt
20-Pin LCC: θJA = 150°C/Watt; θJC = 35°C/Watt
3Indefinite short circuit duration is only permissible as long as the absolute
maximum power rating is not exceeded.
ORDERING GUIDE
Model
Temperature
Range
Package
Description
Package
Option
AD827JN
0°C to +70°C
AD827JR
0°C to +70°C
AD827AQ
–40°C to +85°C
AD827SQ
–55°C to +125°C
AD827SQ/883B –55°C to +125°C
5962-9211701MPA –55°C to +125°C
AD827SE/883B –55°C to +125°C
5962-9211701M2A –55°C to +125°C
AD827JR-REEL 0°C to +70°C
AD827JChips
0°C to +70°C
AD827SChips
–55°C to +125°C
8-Pin Plastic DIP N-8
16-Pin Plastic SO R-16
8-Pin Cerdip
Q-8
8-Pin Cerdip
Q-8
8-Pin Cerdip
Q-8
8-Pin Cerdip
Q-8
20-Pin LCC
E-20A
20-Pin LCC
E-20A
Tape & Reel
Die
Die
METALIZATION PHOTOGRAPH
Contact factory for latest dimensions.
Dimensions shown in inches and (mm).
Substrate is connected to V+.
REV. B
–3–
Share Link: 