TDA1015/N3 Ver la hoja de datos (PDF) - Philips Electronics

Número de pieza

componentes Descripción

Fabricante

TDA1015/N3

1 to 4 W audio power amplifier

Philips Electronics 

Philips Semiconductors

1 to 4 W audio power amplifier

Product specification

TDA1015

Notes

1. Measured with an ideal coupling capacitor to the speaker load.

2. Measured with a load resistor of 20 kΩ.

3. Measured at Po = 1 W; the frequency response is mainly determined by C1 and C3 for the low frequencies and by

C4 for the high frequencies.

4. Independent of load impedance of preamplifier.

5. Unweighted r.m.s. noise voltage measured at a bandwidth of 60 Hz to 15 kHz (12 dB/octave).

6. Ripple rejection measured with a source impedance between 0 and 2 kΩ (maximum ripple amplitude: 2 V).

7. The tab must be electrically floating or connected to the substrate (pin 9).

Fig.3 Test circuit.

November 1982

6

Share Link: