ACS710 Ver la hoja de datos (PDF) - Allegro MicroSystems
Número de pieza
componentes Descripción
Fabricante
ACS710
Allegro MicroSystems
ACS710 Datasheet PDF : 24 Pages
| |||
ACS710
120 kHz Bandwidth, High-Voltage Isolation
Current Sensor with Integrated Overcurrent Detection
Description (continued)
sensor inputs and outputs. This allows theACS710 family of sensors
to be used in applications requiring electrical isolation, without the
use of opto-isolators or other costly isolation techniques.
TheACS710 is provided in a small, surface-mount SOIC16 package.
The leadframe is plated with 100% matte tin, which is compatible
with standard lead (Pb) free printed circuit board assembly processes.
Internally, the device is Pb-free, except for flip-chip high-temperature
Pb‑based solder balls, currently exempt from RoHS. The device is
fully calibrated prior to shipment from the factory.
Applications include:
• Motor control and protection
• Load management and overcurrent detection
• Power conversion and battery monitoring / UPS systems
Selection Guide
Part Number
IP
(A)
ACS710KLATR-6BB-T2,3
±6
ACS710KLATR-10BB-T2
±10
ACS710KLATR-12CB-T2
±12.5
ACS710KLATR-25CB-T2
±25
ACS710KLATR-6BB-NL-T2
±6
ACS710KLATR-10BB-NL-T2
±10
ACS710KLATR-12CB-NL-T2
±12.5
ACS710KLATR-25CB-NL-T2
±25
1 Contact Allegro for packing options.
2 Variant not intended for automotive applications.
Sens (typ)
at VCC = 5 V
(mV/A)
151
85
56
28
151
85
56
28
Latched
TA
Fault
(°C)
Packing1
Yes
–40 to 125 Tape and Reel, 1000 pieces per reel
No
–40 to 125 Tape and Reel, 1000 pieces per reel
Allegro MicroSystems, LLC
2
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
Share Link: