GM71C18163CLT-7 Ver la hoja de datos (PDF) - Hynix Semiconductor
Número de pieza
componentes Descripción
Fabricante
GM71C18163CLT-7 Datasheet PDF : 11 Pages
| |||
GM71C18163C
GM71CS18163CL
DC Electrical Characteristics (VCC = 5V+/-10%, Vss = 0V, TA = 0 ~ 70C)
Symbol
VOH
VOL
ICC1
Parameter
Output Level
Output "H" Level Voltage (IOUT = -2mA)
Output Level
Output "L" Level Voltage (IOUT = 2mA)
Operating Current
Average Power Supply Operating Current
(RAS, UCAS or LCAS Cycling: tRC = tRC min)
ICC2
Standby Current (TTL)
Power Supply Standby Current
(RAS, UCAS, LCAS = VIH, DOUT = High-Z)
ICC3
RAS Only Refresh Current
Average Power Supply Current
RAS Only Refresh Mode
(tRC = tRC min)
ICC4
EDO Page Mode Current
Average Power Supply Current
EDO Page Mode
(tHPC = tHPC min)
ICC5
Standby Current (CMOS)
Power Supply Standby Current
(RAS, UCAS or LCAS >=VCC - 0.2V, DOUT = High-Z)
ICC6
CAS-before-RAS Refresh Current
(tRC = tRC min)
Min Max Unit Note
2.4 VCC
V
0 0.4 V
50ns - 190
60ns - 170 mA 1, 2
70ns - 150
-
2
mA
50ns - 190
60ns - 170 mA 2
70ns -- 150
50ns - 185
60ns - 165 mA 1, 3
70ns - 145
-
1 mA
-
150 uA
5
50ns - 190
60ns - 170 mA
70ns - 150
Battery Back Up Operating Current(Standby with CBR Ref.)
ICC7
(CBR refresh, tRC=125us, tRAS<=0.3us,
DOUT=High-Z, CMOS interface)
- 500 uA 4,5
ICC8
Standby Current RAS = VIH
UCAS, LCAS = VIL
DOUT = Enable
-
5 mA 1
ICC9
Self-Refresh Mode Current
(RAS, UCAS or LCAS <=0.2V, DOUT=High-Z, CMOS interface)
- 300 uA 5
IL(I)
Input Leakage Current
Any Input (0V<=VIN<= 6V)
-10 10 uA
IL(O)
Output Leakage Current
(DOUT is Disabled, 0V<=VOUT<= 6V)
-10 10 uA
Note: 1. ICC depends on output load condition when the device is selected.
ICC(max) is specified at the output open condition.
2. Address can be changed once or less while RAS = VIL.
3. Address can be changed once or less while UCAS and LCAS = VIH.
4. CAS = L (<=0.2V) while RAS = L (<=0.2V).
5. L-version.
Rev 0.1 / Apr’01
Share Link: 