7344/G2T3-AQTB/X Ver la hoja de datos (PDF) - EVERLIGHT

Número de pieza

componentes Descripción

Fabricante

7344/G2T3-AQTB/X

Popular T-1 3/4package

EVERLIGHT 

Technical Data Sheet

7344/G2T3-AQTB/X

6. Soldering Condition

Careful attention should be paid during soldering. When soldering, leave more then 3mm

from solder joint to case, and soldering beyond the base of the tie bar is recommended.

Avoiding applying any stress to the lead frame while the LEDs are at high temperature

particularly when soldering.

Recommended soldering conditions:

Hand Soldering

DIP Soldering

400℃ Max. (30W

Temp. at tip of iron

Max.)

Preheat temp. 100℃ Max. (60 sec Max.)

Soldering time

3 sec Max.

Bath temp.

265 Max.

Distance

3mm Min.(From solder Bath time.

5 sec Max.

joint to case)

Distance

3mm Min.

EVERLIGHT ELECTRONICS CO., LTD.

Office: No 25, Lane 76, Sec 3, Chung Yang Rd,

Tucheng, Taipei 236, Taiwan, R.O.C

Tel: 886-2-2267-2000, 2267-9936

Fax: 886-2267-6244, 2267-6189, 2267-6306

http:\\www.everlight.com

Everlight Electronics Co., Ltd.

Device Number : DLE-734-095

http\\:www.everlight.com

Prepared date: 11-08-2005

Rev 2

Page: 8 of 8

Prepared by: Flourix Chen

Share Link: