DSP56855 Ver la hoja de datos (PDF) - Freescale Semiconductor

Número de pieza

componentes Descripción

Fabricante

DSP56855

16-bit Digital Signal Controllers

Freescale Semiconductor 

Part 3 Signals and Package Information

All digital inputs have a weak internal pull-up circuit associated with them. These pull-up circuits are

enabled by default. Exceptions:

1. When a pin has GPIO functionality, the pull-up may be disabled under software control.

2. MODE A, MODE B and MODE C pins have no pull-up.

3. TCK has a weak pull-down circuit always active.

4. Bidirectional I/O pullups automatically disable when the output is enabled.

This table is presented consistently with the Signals Identified by Functional Group figure.

1. BOLD entries in the Type column represents the state of the pin just out of reset.

2. Output(Z) means an output in a High-Z condition.

Table 3-1. 56855 Signal and Package Information for the 100-pin LQFP

Pin No. Signal Name

Type

Description

9

VDD

35

VDD

65

VDD

84

VDD

10

VSS

36

VSS

66

VSS

85

VSS

VDD

Power (VDD)—These pins provide power to the internal structures of the

chip, and should all be attached to VDD.

VSS

Ground (VSS)—These pins provide grounding for the internal structures of

the chip and should all be attached to VSS.

56855 Technical Data, Rev. 6

10

Freescale Semiconductor

Share Link: