SST29LE010-150-4C-PN Ver la hoja de datos (PDF) - Silicon Storage Technology
Número de pieza
componentes Descripción
Fabricante
SST29LE010-150-4C-PN Datasheet PDF : 30 Pages
| |||
1 Mbit Page-Write EEPROM
SST29EE010 / SST29VE010
Data Sheet
TABLE 4: SOFTWARE COMMAND SEQUENCE
Command
Sequence
1st Bus
Write Cycle
Addr1 Data
2nd Bus
Write Cycle
Addr1 Data
3rd Bus
Write Cycle
Addr1 Data
4th Bus
Write Cycle
Addr1 Data
5th Bus
Write Cycle
Addr1 Data
6th Bus
Write Cycle
Addr1 Data
Software
5555H AAH 2AAAH 55H 5555H A0H Addr2 Data
Data Protect Enable
& Page-Write
Software Chip-Erase3 5555H AAH 2AAAH 55H 5555H 80H 5555H AAH 2AAAH 55H 5555H 10H
Software ID Entry4,5 5555H AAH 2AAAH 55H 5555H 90H
Software ID Exit
5555H AAH 2AAAH 55H 5555H F0H
Alternate
Software ID Entry6
5555H AAH 2AAAH 55H 5555H 80H 5555H AAH 2AAAH 55H 5555H 60H
T4.3 1061
1. Address format A14-A0 (Hex), Addresses A15 and A16 can be VIL or VIH, but no other value.
2. Page-Write consists of loading up to 128 Bytes (A6-A0)
3. The software Chip-Erase function is not supported by the industrial temperature part.
Please contact SST if you require this function for an industrial temperature part.
4. The device does not remain in Software Product ID mode if powered down.
5. With A14-A1 = 0; SST Manufacturer’s ID = BFH, is read with A0 = 0,
SST29EE010 Device ID = 07H, is read with A0 = 1
SST29VE010 Device ID = 08H, is read with A0 = 1
6. Alternate six-byte Software Product ID command code
Note: This product supports both the JEDEC standard three-byte command code sequence and SST’s original six-byte command code
sequence. For new designs, SST recommends that the three-byte command code sequence be used.
©2005 Silicon Storage Technology, Inc.
7
S71061-11-000
9/05
Share Link: 