M27W201-120NZ6TR Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

M27W201-120NZ6TR

2 Mbit (256Kb x 8) Low Voltage UV EPROM and OTP EPROM

STMicroelectronics 

M27W201

1

Summary description

Summary description

The M27W201 is a low voltage 2 Mbit EPROM offered in the two range UV (ultra violet

erase) and OTP (one time programmable). It is ideally suited for microprocessor systems

requiring large data or program storage and is organised as 262,144 by 8 bits.

The M27W201 operates in the read mode with a supply voltage as low as 2.7V at –40 to

85°C temperature range. The decrease in operating power allows either a reduction of the

size of the battery or an increase in the time between battery recharges.

The FDIP32W (window ceramic frit-seal package) has a transparent lid which allows the

user to expose the chip to ultraviolet light to erase the bit pattern. A new pattern can then be

written to the device by following the programming procedure.

For application where the content is programmed only one time and erasure is not required,

the M27W201 is offered in PDIP32, PLCC32 and TSOP32 (8 x 20mm and 8 x 14mm)

packages.

In order to meet environmental requirements, ST offers the M27W201 in ECOPACK®

packages. ECOPACK packages are Lead-free. The category of second Level Interconnect

is marked on the package and on the inner box label, in compliance with JEDEC Standard

JESD97. The maximum ratings related to soldering conditions are also marked on the inner

box label.

ECOPACK is an ST trademark. ECOPACK® specifications are available at: www.st.com.

See Figure 1: Logic Diagram and Table 1: Signal Descriptions for a brief overview of the

signals connected to this device.

Figure 1. Logic Diagram

VCC VPP

18

A0-A17

8

Q0-Q7

P

M27W201

E

G

VSS

AI01359

5/24

Share Link: