DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MT28F160A3 Ver la hoja de datos (PDF) - Micron Technology

Número de pieza
componentes Descripción
Fabricante
MT28F160A3
Micron
Micron Technology Micron
MT28F160A3 Datasheet PDF : 28 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
ADVANCE
1 MEG x 16
ENHANCED BOOT BLOCK FLASH MEMORY
BALL DESCRIPTIONS
46-BALL FBGA
NUMBERS SYMBOL
3B
WE#
TYPE
Input
5A
WP#
Input
7D
CE#
Input
4B
RP#
Input
8F
OE#
Input
1A, 1B, 1C, 1D,
2A, 2B, 2C, 3A,
3C, 5B, 6A, 6B,
6C, 7A, 7B, 7C,
8A, 8B, 8C, 8D
A0-A19
2D, 2E, 2F, 3D,
3E, 3F, 4D, 4E,
4F, 5D, 5E, 6D,
6E, 6F, 7E, 7F
DQ0-DQ15
4A
VPP
Input
Input/
Output
Supply
5F
1E
1F, 8E
VCC
VCCQ
VSS
Supply
Supply
Supply
DESCRIPTION
Write Enable: Determines if a given cycle is a WRITE cycle. If WE# is
LOW, the cycle is either a WRITE to the command state machine (CSM)
or to the memory array.
Write Protect: Unlocks the boot blocks when HIGH if VPP = 2.7V–3.3V
or 5V (WRITE only) and RP# = VIH for WRITE or ERASE. Does not affect
WRITE or ERASE operation on other blocks.
Chip Enable: Activates the device when LOW. When CE# is HIGH, the
device is disabled and goes into standby power mode.
Reset/Power-Down: When LOW, RP# clears the status register, sets the
write state machine (WSM) to the array read mode and places the
device in deep power-down mode. All inputs, including CE#, are
“Don’t Care,” and all outputs are High-Z. RP# must be held at VIH
during all other modes of operation.
Output Enable: Enables data output buffers when LOW. When OE# is
HIGH, the output buffers are disabled.
Address Inputs: These address inputs select a unique, 16-bit word out
of the 1,048,576 available.
Data I/O: These data I/O are data output lines during any READ
operation or data input lines during a WRITE. Data I/O are used to
input commands to the CSM.
Write/Erase Supply Voltage: From a WRITE or ERASE CONFIRM until
completion of the operation, VPP must be 2.7V–3.3V or 5V (WRITE
only). VPP = “Don’t Care” during all other operations.
Power Supply: 2.7V–3.3V.
I/O Supply Voltage: 2.7V–3.3V.
Ground.
1 Meg x 16 Enhanced Boot Block Flash Memory
MT28F160A3_3.p65 – Rev. 3, Pub. 8/01
3
Micron Technology, Inc., reserves the right to change products or specifications without notice.
©2001, Micron Technology, Inc.

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]