39-00-0334 Ver la hoja de datos (PDF) - Molex Connectors
Número de pieza
componentes Descripción
Fabricante
39-00-0334
Molex Connectors
39-00-0334 Datasheet PDF : 2 Pages
| |||
Extractor Tool for 1.57mm (.062") Diameter, Standard .062" Pin and Socket Crimp Terminals
OPERATION:
HANDLE
RETRACTABLE
SPRING LOADED
TUBE
TERMINAL
RETRACTABLE
SPRING
LOADED TUBE
TERMINAL
PUSH-OUT
PIN (SOLID)
Figure 1
CONNECTOR
HOUSING
TERMINAL
LOCKING
TABS
Figure 2
CONNECTOR
HOUSING
1. The Extractor Tool must be In Line with the terminal as
shown. Push terminal forward in arrow direction before
using the Extractor Tool. See Figure 1.
2. The Retractable Spring Loaded Tube must depress the
Locking Tabs on the terminal before it contacts the
Terminal Push out pin. Rotate Extractor Tool while
following above instructions. See Figure 2.
TERMINAL
PUSH-OUT
PIN (SOLID)
3. The terminal push-out pin (solid) pushes the terminal back
through the connector hole as the retractable tube recedes
into the handle. Always re-spread the locking tabs when
reinserting the same terminal.
4. Molex does not offer repair parts for Extractor Tools due to
the inexpensive nature of these tools.
CONNECTOR
HOUSING
RETRACTABLE
TUBE
Figure 3
TERMINAL
Americas Headquarters
Lisle, Illinois 60532 U.S.A.
1-800-78MOLEX
amerinfo@molex.com
Far East North Headquarters
Yamato, Kanagawa, Japan
81-462-65-2324
feninfo@molex.com
Far East South Headquarters
Jurong, Singapore
65-6-268-6868
fesinfo@molex.com
European Headquarters
Munich, Germany
49-89-413092-0
eurinfo@molex.com
Visit our Web site at http://www.molex.com
Corporate Headquarters
2222 Wellington Ct.
Lisle, IL 60532 U.S.A.
630-969-4550
Fax: 630-969-1352
Doc No: ATS-011030002 Release Date: 04-23-03
Revision: D
Revision Date: 03-26-08
UNCONTROLLED COPY
Page 2 of 2
Share Link: