IRS2092 Ver la hoja de datos (PDF) - International Rectifier
Número de pieza
componentes Descripción
Fabricante
IRS2092 Datasheet PDF : 18 Pages
| |||
IRS2092
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All
voltage parameters are absolute voltages referenced to COM; all currents are defined positive into any lead.
The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air
conditions.
Symbol
VB
VS
VHO
VCSH
VCC
VLO
VAA
VSS
Definition
High side floating supply voltage
High side floating supply voltage (Note2)
High side floating output voltage
CSH pin input voltage
Low side fixed supply voltage (Note2)
Low side output voltage
Floating input positive supply voltage (Note2)
Floating input negative supply voltage (Note2)
VGND
IIN-
VCSD
VCOMP
VDT
VOCSET
IAAZ
ISSZ
ICCZ
IBSZ
IOREF
dVS/dt
dVSS/dt
Pd
RthJA
TJ
TS
TL
Floating input supply ground voltage
Inverting input current (Note1)
SD pin input voltage
COMP pin input voltage
DT pin input voltage
OCSET pin input voltage
Floating input positive supply zener clamp current (Note2)
Floating input negative supply zener clamp current (Note2)
Low side supply zener clamp current (Note3)
Floating supply zener clamp current (Note3)
Reference output current
Allowable Vs voltage slew rate
Allowable Vss voltage slew rate (Note3)
Maximum power dissipation @ TA ≤ +25°C
SOIC16N
DIP16
Thermal resistance, Junction to ambient
SOIC16N
DIP16
Junction Temperature
Storage Temperature
Lead temperature (soldering, 10 seconds)
Min
-0.3
VB -20
VS -0.3
VS -0.3
-0.3
-0.3
(See IAAZ)
-1
(See ISSZ)
VSS -0.3
(See ISSZ)
---
VSS -0.3
VSS -0.3
-0.3
-0.3
---
---
---
---
---
---
---
---
---
---
---
---
-55
---
Max
220
VB +0.3
VB +0.3
VB +0.3
20
Vcc+0.3
210
GND +0.3
VAA +0.3
(See IAAZ)
±3
VAA +0.3
VAA +0.3
VCC +0.3
VCC+0.3
20
20
10
10
5
50
50
1.0
1.6
115
75
150
150
300
Units
V
mA
V
mA
V/ns
V/ms
W
°C/W
°C
°C
°C
Note1: IN- contains clamping diode to GND.
Note2: VDD – IN+, GND -VSS, VCC-COM and VB-VS contain internal shunt zener diodes. Please note that the
voltage ratings of these can be limited by the clamping current.
Note3: For the rising and falling edges of step signal of 10 V. VSS=15 V to 200 V.
www.irf.com
© 2007 International Rectifier
6
Share Link: 