4.4.3 Fuse
Parameter
VCC
Type
Fuse
Supplier
TF16SN2.50 KOA Corporation
Rating
2.5 A
32 V
SN-SA-A0003-01-E
Fusing current Remarks
5.0 A
Note1
10/31
Note1: The power supply capacity should be more than the fusing current. If the power supply capacity is less than the
fusing current, the fuse may not blow for a short time, and then nasty smell, smoking and so on may occur.
4.5 CONNECTIONS AND FUNCTIONS FOR INTERFACE PINS
4.5.1 LCD panel signal processing board
CN1 socket(Module side): DF-14H-20P-1.25H(Hirose Electric Co., Ltd.)
Adaptable plug:
DF14-20S-1.25C(Hirose Electric Co., Ltd.)
Pin No. Symbol
Signal
Remarks
1
VCC
Power supply
-
2
VCC
3
GND
Ground
-
4
GND
5
D0-
6
D0+
Pixel data
Note2
7
GND
Ground
-
8
D1-
9
D1+
Pixel data
Note2
10
GND
Ground
-
11
D2-
12
D2+
Pixel data
Note2
13
GND
Ground
-
14
CLK-
15
CLK+
Pixel clock
Note2
16
GND
Ground
-
17
D3-
18
D3+
Pixel data
Note2
19
GND
Ground
-
Selection of LVDS input High:
Input map A mode
20
MSL
Map Note1
Low or Open: Input map B mode
Note1:See“4.5.4 Connection between receiver and transmitter For LVDS” .
Note2:Twist pair wires with 100Ω(Characteristic impedance) should be connected between LCD panel signal
processing board and LVDS transmitter.
Not duplication without authorization
Shanghai SVA NEC Liquid Crystal Display Co., Ltd.