MY2K Ver la hoja de datos (PDF) - OMRON Corporation

Número de pieza

componentes Descripción

Fabricante

MY2K

General-purpose Latching Relay

OMRON Corporation 

Terminal Arrangement/Internal Connections (Bottom View)

AC Model

DC Model

Use at 220 VAC

R

Note: 1. Resistor is for ampere-turn compensation and is

incorporated in the Relay rated at 50 VAC or above.

2. Pay attention to the polarity of the set and reset coils,

as incorrect connection of positive and negative ter-

minal will result in the Relay malfunctioning.

Rs: 7.3 kΩ 3 W

Rr: 14.3 kΩ 1 W

When using the Relay rated at 110 VAC at a supply volt-

age of 220 VAC, be sure to connect external resistors

Rs and Rr to the Relay.

If the supply voltage is applied to the set and reset coils

at the same time, the Relay will be put in the set state.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. J013-E1-02

In the interest of product improvement, specifications are subject to change without notice.

General-purpose Latching Relay MYK

77

Share Link: