DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MICRF213 Ver la hoja de datos (PDF) - Micrel

Número de pieza
componentes Descripción
Fabricante
MICRF213 Datasheet PDF : 16 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Micrel, Inc.
MICRF213
Symbol Parameter
Condition
Min
Typ
Max Units
Demodulator
CTH Source Impedance
CTH Leakage Current
Demodulator Filter
Bandwidth @ 315MHz
(Programmable, see
application section)
Digital / Control Functions
FREFOSC = 9.81563MHz
TA = 25ºC
TA = +105ºC
SEL0=0, SEL1=0
SEL0=1, SEL1=0
SEL0=0, SEL1=1
SEL0=1, SEL1=1
165
k
±2
nA
±800
nA
1180
2360
Hz
4720
9400
DO pin output current
Output rise and fall times
As output
source @ 0.8Vdd
sink @ 0.2Vdd
CI = 15pF, pin DO, 10-90%
260
µA
600
2
µsec
RSSI
RSSI DC Output Voltage
Range
RSSI response slope
-110dBm to -50dBm
-110dBm to -50dBm
0.4 – 1.9
25
V
mV/dB
RSSI Output Current
400
µA
RSSI Output Impedance ±15
200
RSSI Response Time
50% data duty cycle, input power to Antenna = -
20 dBm
0.3
Sec
Notes:
1. Exceeding the absolute maximum rating may damage the device.
2. The device is not guaranteed to function outside of its operating rating.
3. Device is ESD sensitive. Use appropriate ESD precautions. Exceeding the absolute maximum rating may damage the device.
4.
Sensitivity is defined as the average signal level measured at the input necessary to achieve 10-2 BER (bit error rate). The input signal is
defined as a return-to-zero (RZ) waveform with 50% average duty cycle (Manchester encoded) at a data rate of 1kbps.
5. When data burst does not contain preamble, duty cycle is defined as total duty cycle, including any “quiet” time between data bursts. When
data bursts contain preamble sufficient to charge the slice level on capacitor CTH, then duty cycle is the effective duty cycle of the burst alone.
[For example, 100msec burst with 50% duty cycle, and 100msec “quiet” time between bursts. If burst includes preamble, duty cycle is
Ton/(Ton+Toff) = 50%; without preamble, duty cycle is Ton/(Ton+ Toff + Tquiet) = 50msec/(200msec)=25%. Ton is the (Average number of
1’s/burst) x bit time, and Toff = Tburst -Ton.)
May 2007
4
M9999-052307-A
(408) 944-0800

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]