ARD15105 Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
ARD15105
Panasonic Corporation
ARD15105 Datasheet PDF : 14 Pages
| |||
RD (ARD)
2) SP6T
Characteristics
Contact
Rating
Indicator rating
High frequency
characteristics
(Impedance 50Ω)
Electrical
characteristics
Time characteristics
(at 20°C 68°F)
Mechanical
characteristics
Expected life
Conditions
Unit weight
Item
Arrangement
Contact material
Initial contact resistance
Contact
No termination
input power With termination
Nominal
operating
power
Fail-safe
Latching
Contact rating
Initial contact resistance
Min. switching capacity
(Reference value)
V.S.W.R.
(max.)
No termination
With termination
Insertion loss (dB, max.)
Isolation (dB, min.)
Insulation resistance (Initial)
Between open
contacts
Breakdown
voltage
(Initial)
Between contact
and coil
Between contact
and earth terminal
Between coil and
earth terminal
Operate time
Shock
resistance
Functional
Destructive
Vibration
resistance
Functional
Destructive
Mechanical
Electrical
High frequency
contact (Hot switch)
Indicator (with
indicator type only)
Conditions for operation,
transport and storage*2
Specifications
SP6T
Gold plating
Max. 100mΩ (By voltage drop 6V DC 1A)
120 W (at 3GHz) (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 25°C 77°F)*1
2W (at 3GHz) (V.S.W.R. 1.15 or less, no contact switching, ambient temperature 25°C 77°F)*1
840mW (4.5V, 12V DC), 930mW (24V DC)
600mW (4.5V DC), 600mW (12V DC), 620mW (24V DC)
Max. 30V 100mA
Max. 1Ω (Measured by 5V 100mA)
3V DC, 0.1mA (5 × 106, Reliability level: 10% (3kΩ))
to 1 GHz
1 to 4 GHz
4 to 8 GHz
8 to 12.4 GHz
12.4 to 18 GHz
1.1
1.15
1.25
1.35
1.50
1.20
1.40
1.50
1.50
0.2
0.3
0.4
1.0
85
80
70
65
60
Min. 1,000 MΩ (at 500 V DC) Measurement at same location as “breakdown voltage (Initial)” section.
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Max. 20ms (Nominal operating voltage applied to the coil, excluding contact bounce time.)
Min. 500 m/s2 (Half-wave pulse of sine wave: 11ms, detection time: 10μs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 11ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 5mm
Min. 5 × 106 (at 180 cpm)
No termination
Min. 5 × 106 (5W to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2) (at 20 cpm)
With termination
Min. 5 × 106 (2W to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2) (at 20 cpm)
5 VDC, 10 mA, Min. 106 (at 20 cpm)
Ambient temperature: –55°C to +85°C –67°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Approx. 320g 11.29oz
Notes: *1 Factors such as heating of the connected connector influence the high frequency characteristics; therefore, please verify under actual conditions of use.
*2 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “AMBIENT ENVIRONMENT”
in GENERAL APPLICATION GUIDELINES.
–6–
ASCTB103E 201411-T
Share Link: