ARD25105 Ver la hoja de datos (PDF) - Panasonic Corporation
Número de pieza
componentes Descripción
Fabricante
ARD25105
Panasonic Corporation
ARD25105 Datasheet PDF : 14 Pages
| |||
RD (ARD)
2. Specifications
1) SPDT/Transfer
Characteristics
Item
Specifications
Arrangement
SPDT
Transfer
Contact
Rating
Contact material
Initial contact resistance
Contact input power
Nominal
operating
power
Fail-safe
Latching
Gold plating
Max. 100mΩ (By voltage drop 6V DC 1A)
120W (at 3GHz)
(V.S.W.R. 1.15 or less, no contact switching,
ambient temperature 40°C 104°F [SPDT], 25°C 77°F [Transfer])*1
840mW (4.5V, 12V DC), 930mW (24V DC)
1,540mW (4.5V, 12V DC), 1,630mW (24V DC)
600mW (4.5V DC), 600mW (12V DC),
620mW (24V DC)
1,100mW (4.5V DC), 1,100mW (12V DC),
1,120mW (24V DC)
Indicator rating (with
indicator type only)
Contact rating
Initial contact resistance
Min. switching capacity
(Reference value)
Max. 30V 100mA
Max. 1Ω (Measured by 5V 100mA)
3V DC, 0.1mA (5 × 106, Reliability level: 10% (3kΩ))
High frequency
characteristics
(Impedance 50Ω)
V.S.W.R. (max.)
Insertion loss (dB, max.)
to 1 GHz
1 to 4 GHz
1.1
1.15
0.2
4 to 8 GHz*2
1.25
0.3
8 to 12.4 GHz
1.35
0.4
12.4 to 18 GHz
1.5
0.5
18 to 26.5
GHz*3
1.7
0.8
Isolation (dB, min.)
Insulation resistance (Initial)
85
80
70
65
60
55
Min. 1,000 MΩ (at 500 V DC) Measurement at same location as “breakdown voltage (Initial)” section.
Between open
contacts
500 Vrms for 1 min. (Detection current: 10mA)
Electrical
characteristics
Breakdown
voltage
(Initial)
Between contact
and coil
Between contact
and earth terminal
500 Vrms for 1 min. (Detection current: 10mA)
500 Vrms for 1 min. (Detection current: 10mA)
Between coil and
earth terminal
500 Vrms for 1 min. (Detection current: 10mA)
Time characteristics
(at 20°C 68°F)
Mechanical
characteristics
Operate time
Shock
resistance
Vibration
resistance
Functional
Destructive
Functional
Destructive
Max. 15ms (Nominal operating voltage applied to
the coil, excluding contact bounce time.)
Max. 20ms (Nominal operating voltage applied to
the coil, excluding contact bounce time.)
Min. 500 m/s2 (Half-wave pulse of sine wave: 11ms, detection time: 10μs.)
Min. 1,000 m/s2 (Half-wave pulse of sine wave: 11ms.)
10 to 55 Hz at double amplitude of 3mm (Detection time: 10μs.)
10 to 55 Hz at double amplitude of 5mm
Mechanical
6GHz type: Min. 106
18 and 26.5GHz type: Min. 5 × 106
(All types, at 180 cpm)
Min. 5 × 106
(at 180 cpm)
Expected life
Electrical
High frequency
contact (Hot switch)
6GHz type: Min. 106
18 and 26.5GHz type: Min. 5 × 106
(All types, 5W to 3GHz, impedance 50Ω,
V.S.W.R.; max. 1.2) (at 20 cpm)
Min. 5 × 106
(5W to 3GHz, impedance 50Ω, V.S.W.R.; max. 1.2)
(at 20 cpm)
Conditions
Indicator (with
indicator type only)
Conditions for operation,
transport and storage*4
5 V DC, 10 mA, Min. 106 (at 20 cpm)
Ambient temperature: –55°C to +85°C –67°F to +185°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Unit weight
Approx. 50g 1.76oz
Approx. 110g 3.88oz
Notes: *1 Factors such as heating of the connected connector influence the high frequency characteristics; therefore, please verify under actual conditions of use.
*2 The 6GHz type only has the above characteristics up to 6GHz.
*3 18 to 26.5GHz characteristics can be applied 26.5GHz type only (SPDT, Transfer)
*4 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to “AMBIENT ENVIRONMENT”
in GENERAL APPLICATION GUIDELINES.
–5–
ASCTB103E 201411-T
Share Link: