FM25V01 Ver la hoja de datos (PDF) - Ramtron International Corporation

Número de pieza

componentes Descripción

Fabricante

FM25V01

128Kb Serial 3V F-RAM Memory

Ramtron International Corporation 

FM25V01 - 128Kb SPI FRAM

Electrical Specifications

Absolute Maximum Ratings

Symbol

Description

VDD

Power Supply Voltage with respect to VSS

VIN

Voltage on any pin with respect to VSS

TSTG

TLEAD

VESD

Storage Temperature

Lead Temperature (Soldering, 10 seconds)

Electrostatic Discharge Voltage

- Human Body Model (AEC-Q100-002 Rev. E)

- Charged Device Model (AEC-Q100-011 Rev. B)

- Machine Model (AEC-Q100-003 Rev. E)

Package Moisture Sensitivity Level

Ratings

-1.0V to +4.5V

-1.0V to +4.5V

and VIN < VDD+1.0V

-55C to + 125C

260 C

TBD

1.25kV

200V

MSL-1

Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating

only, and the functional operation of the device at these or any other conditions above those listed in the operational section of this

specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device reliability.

DC Operating Conditions (TA = -40C to + 85C, VDD = 2.0V to 3.6V unless otherwise specified)

Symbol Parameter

Min

Typ

Max

Units Notes

VDD

Power Supply Voltage

IDD

Power Supply Operating Current

@ C = 1 MHz

2.0

3.3

3.6

V

1

0.12

0.22

mA

@ C = 40 MHz

1.3

2.5

mA

ISB

Standby Current

90

150

A

2

IZZ

Sleep Mode Current

5

8

A

3

ILI

Input Leakage Current

-

1

A

4

ILO

Output Leakage Current

-

1

A

4

VIH

Input High Voltage

0.7 VDD

VDD + 0.3

V

VIL

Input Low Voltage

-0.3

0.3 VDD

V

VOH1

Output High Voltage (IOH = -1 mA, VDD=2.7V)

2.4

-

V

VOH2

Output High Voltage (IOH = -100 A)

VDD-0.2

-

V

VOL1

Output Low Voltage (IOL = 2 mA, VDD=2.7V)

-

0.4

V

VOL2

Output Low Voltage (IOL = 150 A)

-

0.2

V

RIN

Input Resistance (/HOLD pin)

5

For VIN = VIH (min)

40

K

For VIN = VIL (max)

1

M

Notes

1. C toggling between VDD-0.2V and VSS, other inputs VSS or VDD-0.2V.

2. /S=VDD. All inputs VSS or VDD.

3. In Sleep mode and /S=VDD. All inputs VSS or VDD.

4. VSS  VIN  VDD and VSS  VOUT  VDD.

5. The input pull-up circuit is stronger (> 40K) when the input voltage is above VIH and weak (> 1M) when the input

voltage is below VIL.

Data Retention (TA = -40C to + 85C)

Parameter

Data Retention

Min

Max

Units

Notes

10

-

Years

Rev. 1.1

Sept. 2011

Page 11 of 15

Share Link: