FH23-33S-0.3SHW(05) Ver la hoja de datos (PDF) - HIROSE ELECTRIC

Número de pieza

componentes Descripción

Fabricante

FH23-33S-0.3SHW(05)

0.3mm Contact Pitch, 1.25mm above the board, Flexible Printed Circuit Connectors

HIROSE ELECTRIC 

BConnector Operation and Precautions

1. FPC Termination procedure

1 Lift up the actuator. Use thumb or index finger.

Operation

2 Insert with the FPC parallel to the mounting surface, with the exposed conductive traces facing down.

FPC

conductor surface

Step 1

Step 2

3 Rotate down the actuator until firmly closed.

NOTE: The FPC must be fully inserted in the connector. If not fully

inserted, the actuator will not close properly. Should this be the

case, lift up the actuator (per Step 2 below) and repeat the process

(starting with Step 1 above)

Step 3

3 For connectors with multiple contacts, such as 39 and 61 pos.

rotate down the actuator pushing at both ends.

2. FPC Extraction Method

1 Lift up the actuator. Carefully remove the FPC.

64

Share Link: