DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

TSC87C52-33CHB Ver la hoja de datos (PDF) - Temic Semiconductors

Número de pieza
componentes Descripción
Fabricante
TSC87C52-33CHB
Temic
Temic Semiconductors Temic
TSC87C52-33CHB Datasheet PDF : 24 Pages
First Prev 11 12 13 14 15 16 17 18 19 20 Next Last
EPROM
TSC87C52
EPROM Structure
The TSC87C52 EPROM is divided in two different arrays:
D the code array:
8 Kbytes.
D the encryption array: 64 bytes.
In addition a third non programmable array is implemented:
D the signature array: 4 bytes.
EPROM Lock System
The program Lock system, when programmed, protects the on–chip program against software piracy.
Encryption Array
Within the EPROM array are 64 bytes of encryption array that are initially unprogrammed (all 1’s). Every time a byte
is addressed during program verify, 6 address lines are used to select a byte of the encryption array. This byte is then
exclusive–NOR’ed (XNOR) with the code byte, creating an encryption verify byte. The algorithm, with the encryption
array in the unprogrammed state, will return the code in its original, unmodified form.
When using the encryption array, one important factor needs to be considered. If a byte has the value FFh, verifying
the byte will produce the encryption byte value. If a large block (>64 bytes) of code left unprogrammed, a verification
routine will display the content of the encryption array. For this reason all the unused code bytes should be programmed
with random values. This will ensure program protection.
EPROM Programming
Set–up modes
In order to program and verify the EPROM or to read the signature bytes, the TSC87C52 is placed in specific set–up
modes (see Figure 8).
Control and program signals must be held at the levels indicated in Table 6.
Definition of terms
Address Lines: P1.0–P1.7, P2.0–P2.4 respectively for A0–A12
Data Lines:
P0.0–P0.7 for D0–D7
Control Signals: RST, PSEN, P2.6, P2.7, P3.3, P3.6, P3.7.
Program Signals: ALE/PROG, EA/VPP.
Table 6 EPROM Set–up Modes
Mode
Program Code data
Verify Code data
Program Encryption Array
Address 0–3Fh
Read Signature Bytes
RST
1
1
1
1
PSEN
0
0
0
0
ALE/
PROG
1
EA/VPP
12.75V
1
12.75V
1
1
P2.6
0
0
0
0
P2.7
1
1
P3.3
1
0
1
0
P3.6
1
1
0
0
P3.7
1
1
1
0
MATRA MHS
11
Rev. C – 10 Sept 1997
Preliminary

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]