AD783AQ Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Fabricante
AD783AQ Datasheet PDF : 8 Pages
| |||
AD783
HOLD MODE AC SPECIFICATIONS (TMIN to TMAX with VCC = +5 V ؎ 5%, VEE = –5 V ؎ 5%, CL = 50 pF, unless otherwise noted)
Parameter
AD783J/A
Min
Typ
Max
Units
TOTAL HARMONIC DISTORTION
fIN = 100 kHz
fIN = 500 kHz
SIGNAL-TO-NOISE AND DISTORTION
fIN = 100 kHz
fIN = 500 kHz
INTERMODULATION DISTORTION
(F1 = 99 kHz, F2 = 100 kHz)
Second Order Products
Third Order Products
–85
–80
dB
–72
dB
77
dB
70
dB
–80
dB
–85
dB
NOTES
1fIN amplitude = 0 dB and fSAMPLE = 300 kHz unless otherwise indicated.
Specifications subject to change without notice.
ABSOLUTE MAXIMUM RATINGS*
Spec
With
Respect to Min
Max Units
VCC
VEE
Analog Input
Digital Input
Output Short Circuit to
Ground, VCC, or VEE
Maximum Junction
Temperature
Storage
Lead Temperature
(10 sec max)
COM
COM
COM
COM
–0.5 +6.5 V
–6.5 +0.5 V
–6.5 +6.5 V
–0.5 +6.5 V
Indefinite
+175 °C
–65 +150 °C
+300 °C
PIN CONFIGURATION
VCC 1
IN 2
COMMON 3
NC 4
AD783
TOP VIEW
(Not to Scale)
8 OUT
7 S/H
6 NC
5 VEE
NC = NO CONNECT
*Stresses above those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress rating only and functional
operation of the device at these or any other conditions above those indicated in the
operational section of this specification is not implied.
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD783 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
WARNING!
ESD SENSITIVE DEVICE
ORDERING GUIDE
Model1
Temperature
Range
Description
Package
Options2
AD783JQ
0°C to +70°C
8-Pin Cerdip
Q-8
AD783AQ
–40°C to +85°C
8-Pin Cerdip
Q-8
AD783JR
0°C to +70°C
8-Pin SOIC
R-8
AD783AR
–40°C to +85°C
8-Pin SOIC
R-8
NOTES
1For details on grade and package offerings screened in accordance with MIL-STD-883, refer to the
1Analog Devices Military Products Databook or current AD783/883B data sheet.
2Q = Cerdip, R = SOIC.
REV. A
–3–
Share Link: 