DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

SD4001 Ver la hoja de datos (PDF) - AUK -> KODENSHI CORP

Número de pieza
componentes Descripción
Fabricante
SD4001
AUK
AUK -> KODENSHI CORP AUK
SD4001 Datasheet PDF : 74 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
Semiconductor
SD4001
4BIT MICRO CONTROLLER
Description
The SD4001 is CMOS LSI chips developed for world-wide FM / MW / LW tuning with PLL frequency
synthesizer system. The SD4001 can make a compact and high performance FM / MW / LW tuner
with clock function for high-end car stereo, home stereo and so on because these CMOS LSIs are in
64-pin QFP package with built-in PLL frequency synthesizer, controller, 200 MHz prescaler, LCD
driver and IF counter.
Functions
Radio Functions
(1) Manual tuning
Manual tuning up/down ….. Stepped tuning an d rapid tuning.
(2) Auto tuning
Seek up/down ….. Retaining the frequency of a station received.
Scan up/down ….. Receiving in intervals of 5 seconds.
(3) Preset memory scanning ….. Receiving the contents of preset memories on the FM, MW.
and LW bands for 5 seconds each.
(4) VF auto – tuning
SK seek up/down …. Retaining the frequency of a SK signal received.
SK scan up/down …. Receiving a station with SK signal in intervals of 5 seconds.
(5) Preset memories
FM band …. FM 1:6 stations, RW 2:6 stations, FM 3:6 stations
MW band … MW 1:6 stations, MW 2:6 stations
LW band … 6 stations
VF band …. 6 stations
MW2 cannot be used while the LW band is used.
(6) Last-preset memories …… 1 station on the FM1, FM2, FM3, MW1, MW2, LW and VF
bands each.
(7) LOC (local) control signal outputs and indications.
(8) FM MONO (monaural) control signal output and indication.(For VF bands, same as for FM)
(9) “ST” (stereo) indicator …… Enabled on the FM and VF bands.
(10) Auto-preset memories
(11) DK stand-by and SK alarm function
Tape Functions
(1) Tape transport direction indictors ….. Can flash at 2 HZ during fast forward.
(2) AMS (auto music search) control signal output and indication.
(3) MTL (metal) control signal output and indication.
(4) NR1 (noise reduction) and NR2 control outputs and indications.
KSI-W018-000
1

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]