S-24CS02AFT-TFH Ver la hoja de datos (PDF) - Seiko Instruments Inc

Número de pieza

componentes Descripción

Fabricante

S-24CS02AFT-TFH

(S-24CS0xA) 2-Wire CMOS Serial E2PROM

Seiko Instruments Inc 

2-WIRE CMOS SERIAL E2PROM

S-24CS01A/02A/04A/08A

Rev.4.4_00

„ Operation

1. Start Condition

Start is identified by a high to low transition of the SDA line while the SCL line is stable at high.

Every operation begins from a start condition.

2. Stop Condition

Stop is identified by a low to high transition of the SDA line while the SCL line is stable at high.

When a device receives a stop condition during a read sequence, the read operation is interrupted, and

the device enters standby mode.

When a device receives a stop condition during a write sequence, the reception of the write data is halted,

and the E2PROM initiates a write cycle.

tSU.STA tHD.STA

tSU.STO

SCL

SDA

Start Condition

Stop Condition

Figure 9 Start / Stop Conditions

10

Seiko Instruments Inc.

Share Link: