RS232 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

RS232

MINIATURE ELECTRONIC 8-DIGIT DUAL COUNTER AND RATE INDICATOR

Unspecified 

6.3 MODULE 3 - Display and Front Panel Key

Parameters (3-dSPLAY)

3-dSPLAY

SEL

SEL Enb

Front Panel

Display Select

Enable

RSt Enb

Front Panel

Counter

Reset Enable

d-ScroLL

Display Scroll

Enable

PARAMETER MENU

Backlight Unit Only

d-COLOr

Display

Color

d-LEVEL

Display

Intensity

Level

Pro CodE

Programming

Security

Code

CodE UEr

Software

Version

Display

Pro

FACt SEt

Load Factory

Default

Settings

FRONT PANEL DISPLAY SELECT ENABLE (SEL)

SEL Enb 



yES yES NO

The yES selection allows the SEL button to toggle through the enabled

displays.

FRONT PANEL COUNTER RESET ENABLE (RST)

RSt Enb 

 YES

yES

NO both A-b

NO Count A

dSPLAy

Count b

The yES selection allows the RST button to reset the selected counter(s). The

shaded selections are only active when Counter B is enabled (Dual Count mode

or batch counter).

DISPLAY SCROLL ENABLE

d-ScroLL 



NO yES NO

The yES selection allows the display to automatically scroll through the

enabled displays. Each display is shown for 4 seconds.

DISPLAY COLOR (BACKLIGHT UNIT ONLY)

d-COLOr 



rEd rEd 6rn

Enter the desired display color, red or green. This parameter is active for

backlight units only.

DISPLAY INTENSITY LEVEL (BACKLIGHT UNIT ONLY)

d-LEVEL  1 to 5



5

Enter the desired Display Intensity Level (1-5). The display will actively dim

or brighten as levels are changed. This parameter is active for backlight units only.

PROGRAMMING SECURITY CODE

Pro CodE 



0 to 999

000

The Security Code determines the programming mode and the accessibility

of programming parameters. This code can be used indepentently or along with

the Program Mode Lock-out (Pro Loc) selection in the User Input Function

parameter (Module 1).

Two programming modes are available. Full Programming mode allows all

unit parameters to be viewed and modified. Quick Programming mode permits

only user selected values to be modified, but allows direct access to these values

without having to enter Full Programming mode.

Entering a Security Code from 1-99 enables Quick Programming mode, and

displays a sublist to select what values appear in the Quick Programming menu.

All applicable values set to YES in the sublist will be accessible in Quick

Programming. The sublist includes Setpoint values (SP1 VAL, SP2 VAL), Output

Time-out values (SP1 tOUt, SP2 tOUt), Counter A Count Load value (CntA Ld) and

the Display Intensity Level (d-LEVEL) for backlight units.

Programming any Security Code other than 0, requires this code to be entered

at the Pro CodE prompt in order to access Full Programming mode. Quick

Programming mode, if enabled, is accessed before the Pro CodE prompt.

USER INPUT USER INPUT SECURITY MODE WHEN “SEL”

FUNCTION STATE

CODE KEY IS PRESSED

0 Full Programming

FULL PROGRAMMING

MODE ACCESS

Immediate Access

not Pro Loc ______

1-99

Quick

Programming

After Quick Programming

with correct code entry

at Pro CodE prompt *

Pro Loc

Active

Not Active

100-999

0

1-99

Pro

CodE prompt

With correct code entry at

Pro CodE prompt *

Programming

Lock

No Access

Quick

Programming

No Access

100-999

Pro

CodE prompt

With correct code entry at

Pro CodE prompt *

0-999 Full Programming Immediate Access

* Entering Code 222 allows access regardless of security code.

SOFTWARE VERSION DISPLAY

CodE UEr 



NO yES

NO

Select YES to momentarily display the meter software version before advancing

to the next parameter. The software version is also displayed at power-up.

LOAD FACTORY DEFAULT SETTINGS

FACt SEt 



MO NO yES

The yES selection will return the meter to the factory default settings. The

meter will display rESEt and then return to Pro, at which time all settings have

been changed.

10

Share Link: