74LVCH162373ADL Ver la hoja de datos (PDF) - Philips Electronics

Número de pieza

componentes Descripción

Fabricante

74LVCH162373ADL

16-bit D-type transparent latch; 30 Ω series termination resistors; 5 V tolerant inputs/outputs; 3-state

Philips Electronics 

Philips Semiconductors

Product specification

16-bit D-type transparent latch; 30 Ω series termination 74LVC162373A;

resistors; 5 V tolerant inputs/outputs; 3-state

74LVCH162373A

FEATURES

• 5 V tolerant inputs/outputs for interfacing with 5 V logic

• Wide supply voltage range from 1.2 to 3.6 V

• CMOS low power consumption

• MULTIBYTE flow-through standard pin-out architecture

• Low inductance multiple power and ground pins for

minimum noise and ground bounce

• Direct interface with TTL levels

• All data inputs have bushold (74LVCH162373A only)

• High-impedance when VCC = 0 V

• Complies with JEDEC standard no. 8-1A

• ESD protection:

HBM EIA/JESD22-A114-A exceeds 2000 V

MM EIA/JESD22-A115-A exceeds 200 V.

• Specified from −40 to +85 °C and −40 to +125 °C.

DESCRIPTION

The 74LVC(H)162373A is a 16-bit D-type transparent

latch featuring separate D-type inputs for each latch and

3-state outputs for bus oriented applications. One latch

enable (pin nLE) input and one output enable (pin nOE)

are provided for each octal. Inputs can be driven from

either 3.3 or 5 V devices. In 3-state operation, outputs can

handle 5 V. These features allow the use of these devices

in a mixed 3.3 and 5 V environment.

The 74LVC(H)162373A consists of 2 sections of eight

D-type transparent latches with 3-state true outputs. When

pin nLE is HIGH, data at the corresponding data inputs

(pins nDn) enter the latches. In this condition the latches

are transparent, i.e., a latch output will change each time

its corresponding data inputs changes.

When pin nLE is LOW the latches store the information

that was present at the data inputs a set-up time preceding

the HIGH-to-LOW transition of pin nLE. When pin nOE is

LOW, the contents of the eight latches are available at the

outputs. When pin nOE is HIGH, the outputs go to the

high-impedance OFF-state. Operation of the nOE input

does not affect the state of the latches.

The 74LVCH162373A bushold data inputs eliminates the

need for external pull-up resistors to hold unused inputs.

The 74LVC(H)162373A is designed with 30 Ω series

termination resistors in both high and low output stages to

reduce line noise.

QUICK REFERENCE DATA

GND = 0 V; Tamb = 25 °C; tr = tf ≤ 2.5 ns

SYMBOL

PARAMETER

CONDITIONS

tPHL/tPLH

tPZH/tPZL

tPHZ/tPLZ

CI

CPD

propagation delay nDn to nQn

CL = 50 pF; VCC = 3.3 V

propagation delay nLE to nQn

CL = 50 pF; VCC = 3.3 V

3-state output enable time nOE to nQn CL = 50 pF; VCC = 3.3 V

3-state output disable time nOE to nQn CL = 50 pF; VCC = 3.3 V

input capacitance

power dissipation per latch

VCC = 3.3 V; notes 1 and 2

outputs enabled

outputs disabled

Notes

1. CPD is used to determine the dynamic power dissipation (PD in µW).

PD = CPD × VCC2 × fi × N + Σ(CL × VCC2 × fo) where:

fi = input frequency in MHz;

fo = output frequency in MHz;

CL = output load capacitance in pF;

TYPICAL

3.3

3.5

4.0

3.4

5.0

26

19

UNIT

ns

ns

ns

ns

pF

pF

pF

2004 Feb 05

2

Share Link: