MX25L4005MI-15G Ver la hoja de datos (PDF) - Macronix International

Número de pieza

componentes Descripción

Fabricante

MX25L4005MI-15G

4M-BIT [x 1] CMOS SERIAL FLASH

Macronix International 

MX25L4005

FEATURES

GENERAL

• Serial Peripheral Interface (SPI) compatible -- Mode 0

and Mode 3

• 4,194,304 x 1 bit structure

• 128 Equal Sectors with 4K byte each

- Any Sector can be erased individually

• 8 Equal Blocks with 64K byte each

- Any Block can be erased individually

• Single Power Supply Operation

- 2.7 to 3.6 volt for read, erase, and program operations

• Latch-up protected to 100mA from -1V to Vcc +1V

• Low Vcc write inhibit is from 1.5V to 2.5V

PERFORMANCE

• High Performance

- Fast access time: 70MHz serial clock (15pF + 1TTL

Load) and 66MHz serial clock (30pF + 1TTL Load)

- Fast program time: 1.4ms(typ.) and 5ms(max.)/page

(256-byte per page)

- Fast erase time: 60ms(typ.) and 120ms(max.)/sector

(4K-byte per sector) ; 1s(typ.) and 2s(max.)/block (64K-

byte per block)

• Low Power Consumption

- Low active read current: 12mA(max.) at 70MHz,

8mA(max.) at 66MHz and 4mA(max.) at 33MHz

- Low active programming current: 15mA (max.)

- Low active erase current: 15mA (max.)

- Low standby current: 10uA (max.)

- Deep power-down mode 1uA (typical)

• Minimum 100,000 erase/program cycles

4M-BIT [x 1] CMOS SERIAL FLASH

SOFTWARE FEATURES

• Input Data Format

- 1-byte Command code

• Block Lock protection

- The BP0~BP2 status bit defines the size of the area

to be software protected against Program and Erase

instructions.

• Auto Erase and Auto Program Algorithm

- Automatically erases and verifies data at selected

sector

- Automatically programs and verifies data at selected

page by an internal algorithm that automatically times

the program pulse widths (Any page to be programed

should have page in the erased state first)

• Status Register Feature

• Electronic Identification

- JEDEC 2-byte Device ID

- RES command, 1-byte Device ID

HARDWARE FEATURES

• SCLK Input

- Serial clock input

• SI Input

- Serial Data Input

• SO Output

- Serial Data Output

• WP# pin

- Hardware write protection

• HOLD# pin

- pause the chip without diselecting the chip

• PACKAGE

- 8-pin SOP (150mil)

- 8-pin SOP (200mil)

- 8-land SON (6x5mm)

- All Pb-free devices are RoHS Compliant

P/N: PM1236

REV. 1.1, SEP. 30, 2005

1

Share Link: