MC68SC302 Ver la hoja de datos (PDF) - Freescale Semiconductor

Número de pieza

componentes Descripción

Fabricante

MC68SC302

Passive ISDN Protocol Engine

Freescale Semiconductor 

Freescale Semiconductor, Inc.

stored in a parallel EEPROM on the external PCMCIA bus. An additional chip select is provided to support

access to an external device from the PC Card interface.

The MC68SC302 also has up to 12 general purpose I/O pins to connect to external circuits. Five external chip

interrupts can be brought in and routed through a built-in interrupt controller to any one of 11 ISA interrupts (or

to the PC Card interface interrupt). The MC68SC302 can be clocked at the same rate as the physical layer

transceiver clock which eliminates the need for a dedicated oscillator or crystal.

PIO AND INTERRUPT PINS

Y COMMUNICATIONS

PROCESSOR

1536 BYTE

RAM

PIO AND INT I/F

ISA PnP

PCMCIA

INTERFACE

ISA PnP/

PCMCIA

INTERFACE

PRELIMINAR SCC1

SCC2

SCC3

2 SMCs

SCP

IDL/GCI INTERFACE

NMSI I/F

NMSI PINS

IDL/GCI PINS

SCP/E2 PROM INTERFACE

Figure 1. MC68SC302 Block Diagram

REFERENCE DESIGNS

Figure 2 shows the 68SC302 in an NT1 terminal adaptor (TA) application using the MC68SC302. The TA

supports a basic rate interface (BRI). The 68SC302 is connected gluelessly to the ISA bus connector and

performs the Plug and Play interface using the serial EEPROM for storage of non-volatile Plug and Play data.

Data and control accesses from the PC to the MC68SC302 can be selectively memory or I/O mapped. Only

one clock source (crystal or oscillator) is needed for a simple terminal adaptor.

MC68SC302 PRODUCT INFORMATION

For More Information On This Product,

Go to: www.freescale.com

Share Link: