MAX7314 Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Fabricante
MAX7314
Maxim Integrated
MAX7314 Datasheet PDF : 25 Pages
| |||
18-Port GPIO with LED Intensity Control,
Interrupt, and Hot-Insertion Protection
PIN
QSOP
1
QFN
22
2
23
3
4–11, 13–20
12
21
22
23
24
—
24
1–8, 10–17
9
18
19
20
21
PAD
Pin Description
NAME
FUNCTION
INT/O16
Output Port. Open-drain output rated at 7V, 50mA. Configurable as interrupt
output or general-purpose output.
RST
Reset Input. Active low clears the 2-wire interface and puts the device in the
same condition as power-up reset.
AD0
Address Input. Sets device slave address. Connect to either GND, V+, SCL,
or SDA to give four logic combinations. See Table 1.
P0–P15
GND
BLINK
SCL
SDA
Input/Output Ports. P0–P15 are open-drain I/Os rated at 5.5V, 50mA.
Ground. Do not sink more than 350mA into the GND pin.
Input Port Configurable as Blink Control or General-Purpose Input
I2C-Compatible Serial Clock Input
I2C-Compatible Serial Data I/O
V+
Positive Supply Voltage. Bypass V+ to GND with a 0.047µF ceramic
capacitor.
Exposed Pad Exposed Pad on Package Underside. Connect to GND.
DATA FROM
SHIFT REGISTER
DATA FROM
SHIFT REGISTER
WRITE
CONFIGURATION
PULSE
CONFIGURATION
REGISTER
DQ
FF
CK Q
OUTPUT
PORT
REGISTER
DQ
FF
WRITE PULSE
CK Q
READ PULSE
Figure 1. Simplified Schematic of I/O Ports
INPUT PORT
REGISTER
DQ
FF
CK Q
OUTPUT PORT
REGISTER DATA
I/O PIN
Q2
GND
INPUT PORT
REGISTER DATA
TO INT
Functional Overview
The MAX7314 is a general-purpose input/output (GPIO)
peripheral that provides 16 I/O ports, P0–P15, con-
trolled through an I2C-compatible serial interface. A
17th output-only port, INT/O16, can be configured as
an interrupt output or as a general-purpose output port.
All output ports sink loads up to 50mA connected to
external supplies up to 5.5V, independent of the
MAX7314’s supply voltage. The MAX7314 is rated for a
ground current of 350mA, allowing all 17 outputs to sink
20mA at the same time. Figure 1 shows the output
structure of the MAX7314. The ports default to inputs on
power-up.
6 _______________________________________________________________________________________
Share Link: