MAX7036 Ver la hoja de datos (PDF) - Maxim Integrated

Número de pieza

componentes Descripción

Fabricante

MAX7036

300MHz to 450MHz ASK Receiver with Internal IF Filter

Maxim Integrated 

MAX7036

300MHz to 450MHz ASK Receiver

with Internal IF Filter

Absolute Maximum Ratings

VDD to GND...........................................................-0.3V to +6.0V

AVDD to GND........................................................-0.3V to +4.0V

DVDD to GND........................................................-0.3V to +4.0V

ENABLE to GND.........................................-0.3V to (VDD + 0.3V)

LNAIN to GND.......................................................-0.3V to +1.2V

All Other Pins to GND.............................-0.3V to (VDVDD + 0.3V)

Continuous Power Dissipation (TA = +70°C)

20-Pin TQFN (derate 20.8mW/°C above +70°C)....1666.7mW

Junction-to-Case Thermal Resistance (θJC) (Note 1)

20-Pin TQFN..................................................................2°C/W

Junction-to-Ambient Thermal Resistance (θJA) (Note 1)

20-Pin TQFN................................................................48°C/W

Operating Temperature Range .........................-40°C to +105°C

Junction Temperature......................................................+150°C

Storage Temperature Range .............................-65°C to +150°C

Lead Temperature (soldering, 10s) .................................+300°C

Soldering Temperature (reflow) .......................................+260°C

Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer

board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial.

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these

or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect

device reliability.

3.3V DC Electrical Characteristics

(Typical Application Circuit, 50Ω system impedance, VAVDD = VDVDD = VDD = 3.0V to 3.6V, fRF = 300MHz to 450MHz, TA = -40°C to

+105°C, unless otherwise noted. Typical values are at VAVDD = VDVDD = VDD = 3.3V, TA = +25°C, unless otherwise noted.) (100%

tested at TA = +105°C.)

PARAMETER

Supply Voltage

Supply Current

DIGITAL INPUT (ENABLE)

Input High Voltage

SYMBOL

VDD

IIN

CONDITIONS

VAVDD = VDVDD = VDD

fRF = 315MHz

TA < +105°C

fRF = 433MHz

Deep-sleep mode,

VENABLE = 0V

VIH

VAVDD = VDVDD = VDD

MIN TYP MAX UNITS

3.0

3.3

3.6

V

5.3

6.7

mA

5.8

7.3

1

2.7

µA

VDD -

0.4

V

Input Low Voltage

Input Current

DIGITAL OUTPUT (DATAOUT)

Output Low Voltage

Output High Voltage

VIL

IENABLE

VAVDD = VDVDD = VDD

0 ≤ VENABLE ≤ VDD

VOL

VOH

ISINK = 100µA

ISOURCE = 100µA

VDD -

0.4

0.4

V

20

µA

0.4

V

V

www.maximintegrated.com

Maxim Integrated │  2

Share Link: