DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

MAX4741(2001) Ver la hoja de datos (PDF) - Maxim Integrated

Número de pieza
componentes Descripción
Fabricante
MAX4741 Datasheet PDF : 12 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
0.8, Low-Voltage, Single-Supply Dual SPST
Analog Switches
ABSOLUTE MAXIMUM RATINGS
Voltages Referenced to GND
V+, IN_......................................................................-0.3V to +4V
COM_, NO_, NC_ (Note 1) ...........................-0.3V to (V+ + 0.3V)
Continuous Current COM_ , NO_, NC_ .........................±150mA
Peak Current COM_, NO_, NC_
(pulsed at 1ms 10% duty cycle)..................................±300mA
Continuous Power Dissipation (TA = +70°C)
8-Pin SOT23 (derate 7.52mW/°C above +70°C)...........602mW
8-Pin µMAX (derate 4.5mW/°C above +70°C) ..............362mW
Operating Temperature Range ...........................-40°C to +85°C
Maximum Junction Temperature .....................................+150°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (soldering, 10s) .................................+300°C
Note 1: Signals on COM_, NO_, or NC_ exceeding V+ or GND are clamped by internal diodes. Limit forward current to
maximum current rating.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Single +3V Supply
(V+ = +2.7V to +3.6V, VIH = +1.4V, VIL = +0.5V, TA = TMIN to TMAX, unless otherwise specified. Typical values are at V+ = +3.0V,
TA = +25°C.) (Notes 2, 3)
PARAMETER
ANALOG SWITCH
SYMBOL
CONDITIONS
TA
MIN TYP MAX UNITS
Analog Signal Range
VCOM_,
VNO_,
VNC_
0
V+
V
On-Resistance
RON
V+ = 2.7V,
ICOM_ = 100mA,
VNO_ or VNC_ = 1.5V
+25°C
TMIN to TMAX
0.5
0.8
0.9
On-Resistance Match
Between Channels (Note 4)
RON
V+ = 2.7V,
ICOM_ = 100mA,
VNO_ or VNC_ = 1.5V
+25°C
TMIN to TMAX
0.05 0.08
0.09
On-Resistance Flatness
(Note 5)
RFLAT(ON)
V+ = 2.7V,
ICOM_ = 100mA,
VNO_ or VNC_ = 1V, 1.5V, 2V
+25°C
TMIN to TMAX
0.05 0.18
0.20
NO_ or NC_ Off-Leakage
Current
INO_(OFF),
INC_(OFF)
V+ = 3.3V,
VCOM_ = 0.3V, 3V,
VNO_ or VNC_ = 3V, 0.3V
+25°C
-1
TMIN to TMAX
-5
V+ = 3.3V,
+25°C
-1
COM_ Off-Leakage Current
ICOM_(OFF)
VCOM_ = 0.3V, 3V
VNO_ or VNC_ = 3V, 0.3V or
floating
TMIN to TMAX
-5
COM_ On-Leakage Current
ICOM_(ON)
V+ = 3.3V,
VCOM_ = 3V, 0.3V;
VNO_ or VNC_ = 3V, 0.3V or
floating
+25°C
-2
TMIN to TMAX -10
1
nA
5
1
nA
5
2
nA
10
2 _______________________________________________________________________________________

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]