MAX3814 Ver la hoja de datos (PDF) - Maxim Integrated
Número de pieza
componentes Descripción
Fabricante
MAX3814 Datasheet PDF : 14 Pages
| |||
DVI/HDMI TMDS FR-4 and
Cable Equalizer/Driver
ABSOLUTE MAXIMUM RATINGS
Termination-Supply Voltage Range.......................-0.5V to +4.0V
Signal Voltage Range on Any One Signal Wire ....-0.5V to +4.0V
CML Common-Mode Voltage Range on
Any I/O Pair (sustained) .....................................-0.5V to +5.5V
CML Common-Mode Voltage Range on Any I/O Pair
(sustained, within VCC and GND) ...-3.3V to +3.3V, Differential
CML Output Loading (termination)............................0Ω to Open
Operating Ambient Temperature Range ................0°C to +70°C
Storage Ambient Temperature Range...............-40°C to +150°C
ESD Human Body Model, Any Pin .....................................2000V
Lead Temperature (soldering, 10s) .................................+300°C
Soldering Temperature (reflow) .......................................+260°C
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
SPECIFICATION TABLES
(Typical values measured at VCC = 3.3V, TA = +25°C; external terminations = 50Ω ±1%; min/max values valid over VCC = 3.3V
±0.3V, TA = 0°C to +70°C; with external terminations = 50Ω ±1% to voltage = 3.3V ±0.7V. Tested at 1.65Gbps. AC parameters guar-
anteed by design and characterization.)
OPERATING CONDITIONS
PARAMETER
SYMBOL
CONDITIONS
MIN
Supply Voltage
VCC
3.0
Operating Ambient Temperature
0
Data Rate
0.25
Maximum Channel Loss
At 825MHz, FR-4 microstrip compensate
15
on curve
Source Output Rise/Fall Time
20% to 80%, measured at source
transmitter (input to channel)
Differential Input-Voltage Swing
Measured at source transmitter (input to
700
channel)
Maximum Supply Noise
Tolerance
DC-5000kHz, all specifications maintained
TYP
3.3
25
1050
50
MAX
3.6
70
1.65
UNITS
V
°C
Gbps
dB
240
ps
1400 mVP-P
mVP-P
POWER SUPPLY
PARAMETER
DC PARAMETERS
Supply Current
CONDITIONS
MIN TYP MAX UNITS
110 140 mA
TMDS EQUALIZER PERFORMANCE
PARAMETER
Residual Output Jitter (15 x
RJRMS + DJ) from 0.25Gbps to
1.65Gbps
CONDITIONS
Subtract source jitter for DJ, 0 to 15dB FR4 loss at
825MHz (Note 1)
MIN TYP MAX UNITS
0.2 UIP-P
2 _______________________________________________________________________________________
Share Link: 