HFBR-5103AT Ver la hoja de datos (PDF) - HP => Agilent Technologies

Número de pieza

componentes Descripción

Fabricante

HFBR-5103AT

100 Mbps ATM, and Fast Ethernet Transceivers in Low Cost 1x9 Package Style

HP => Agilent Technologies 

Agilent HFBR-5103/-5103T 1300 nm 2000 m

HFBR-5103A/-5103AT/-5103P/-5103PE FDDI,

100 Mbps ATM, and Fast Ethernet

Transceivers in Low Cost 1x9 Package Style

Data Sheet

Description

The HFBR-5100 family of

transceivers from Agilent

Technologies provide the system

designer with products to

implement a range of FDDI and

ATM (Asynchronous Transfer

Mode) designs at the 100 Mbps/

125 MBd rate.

The transceivers are all supplied

in the new industry standard 1x9

SIP package style with either a

duplex SC or a duplex ST*

connector interface.

FDDI PMD, ATM and Fast Ethernet

2000 m Backbone Links

The HFBR-5103/-5103T are 1300

nm products with optical

performance compliant with the

FDDI PMD standard. The FDDI

PMD standard is ISO/IEC 9314-3:

1990 and ANSI X3.166 - 1990.

These transceivers for 2000 meter

multimode fiber backbones are

supplied in the small 1x9 duplex

SC or ST package style for those

designers who want to avoid the

larger MIC/R (Media Interface

Connector/Receptacle) defined in

the FDDI PMD standard.

Agilent Technologies also

provides several other FDDI

products compliant with the PMD

and SM-PMD standards. These

products are available with MIC/

R, ST© and FC connector styles.

They are available in the 1x13 and

2x11 transceiver and 16 pin

transmitter/receiver package

styles for those designs that

require these alternate

configurations.

The HFBR-5103/-5103T is also

useful for both ATM 100 Mbps

interfaces and Fast Ethernet 100

Base-FX interfaces. The ATM

Forum User-Network Interface

(UNI) Standard, Version 3.0,

defines the Physical Layer for 100

Mbps Multimode Fiber Interface

for ATM in Section 2.3 to be the

FDDI PMD Standard. Likewise,

the Fast Ethernet Alliance defines

the Physical Layer for 100 Base-

FX for Fast Ethernet to be the

FDDI PMD Standard.

Features

• Full Compliance with the Optical

Performance Requirements of the

FDDI PMD Standard

• Full Compliance with the FDDI LCF-

PMD Standard

• Full Compliance with the Optical

Performance Requirements of the

ATM 100 Mbps Physical Layer

• Full Compliance with the Optical

Performance Requirements of

100 Base-FX Version of IEEE 802.3u

• Multisourced 1x9 Package Style with

Choice of Duplex SC or Duplex ST*

Receptacle

• Wave Solder and Aqueous Wash

Process Compatible

• Manufactured in an ISO 9002

Certified Facility

Applications

• Multimode Fiber Backbone Links

• Multimode Fiber Wiring Closet to

Desktop Links

• Multimode Fiber Media Converter

Note: The “T” in the product numbers indicates

a transceiver with a duplex ST connector

receptacle. Product numbers without a “T”

indicate transceivers with a duplex SC

connector receptacle.

*ST is a registered trademark of AT&T Lightguide Cable Connectors.

Share Link: