28F008C3 Ver la hoja de datos (PDF) - Intel
Número de pieza
componentes Descripción
Fabricante
28F008C3 Datasheet PDF : 59 Pages
| |||
E
3 VOLT ADVANCED+ BOOT BLOCK
Table 2. 3 Volt Advanced+ Boot Block Pin Descriptions
Symbol
A0–A21
DQ0–DQ7
Type
Name and Function
INPUT
ADDRESS INPUTS for memory addresses. Addresses are internally
latched during a program or erase cycle.
8-Mbit x 8 A[0-19], 16-Mbit x 8 A[0-20], 32-Mbit x 8 A[0-21]
8-Mbit x 16 A[0-18], 16-Mbit x 16 A[0-19], 32-Mbit x 16 A[0-20]
INPUT/OUTPUT
DATA INPUTS/OUTPUTS: Inputs array data on the second CE# and
WE# cycle during a Program command. Inputs commands to the
Command User Interface when CE# and WE# are active. Data is
internally latched. Outputs array, configuration and status register data.
The data pins float to tri-state when the chip is de-selected or the outputs
are disabled.
DQ8–DQ15
INPUT/OUTPUT
DATA INPUTS/OUTPUTS: Inputs array data on the second CE# and
WE# cycle during a Program command. Data is internally latched.
Outputs array and configuration data. The data pins float to tri-state when
the chip is de-selected. Not included on x8 products.
CE#
INPUT
CHIP ENABLE: Activates the internal control logic, input buffers,
decoders and sense amplifiers. CE# is active low. CE# high de-selects
the memory device and reduces power consumption to standby levels.
OE#
INPUT
OUTPUT ENABLE: Enables the device’s outputs through the data
buffers during a read operation. OE# is active low.
WE#
INPUT
WRITE ENABLE: Controls writes to the Command Register and
memory array. WE# is active low. Addresses and data are latched on
the rising edge of the second WE# pulse.
RP#
INPUT
RESET/DEEP POWER-DOWN: Uses two voltage levels (VIL, VIH) to
control reset/deep power-down mode.
When RP# is at logic low, the device is in reset/deep power-down
mode, which drives the outputs to High-Z, resets the Write State
Machine, and minimizes current levels (ICCD).
When RP# is at logic high, the device is in standard operation.
When RP# transitions from logic-low to logic-high, the device resets all
blocks to locked and defaults to the read array mode.
WP#
INPUT
WRITE PROTECT: Controls the lock-down function of the flexible
Locking feature
When WP# is a logic low, the lock-down mechanism is enabled and
blocks marked lock-down cannot be unlocked through software.
When WP# is logic high, the lock-down mechanism is disabled and
blocks previously locked-down are now locked and can be unlocked and
locked through software. After WP# goes low, any blocks previously
marked lock-down revert to that state.
See Section 3.3 for details on block locking.
VCC
SUPPLY
DEVICE POWER SUPPLY: [2.7 V–3.6 V] Supplies power for device
operations.
PRODUCT PREVIEW
9
Share Link: 