CMY210 Ver la hoja de datos (PDF) - Infineon Technologies

Número de pieza

componentes Descripción

Fabricante

CMY210

GaAs MMIC

Infineon Technologies 

GaAs Components

CMY 210

Note 2

The LO-Buffer needs an external inductor L4 at port 4; the value of inductance depends

on the LO frequency. It is tuned for minimum IOP consumption into port 4.

At lower LO frequencies it can be reduced by an additional capacitor C5.

Note 3

The LO Input impedance at Port 3 can be matched with a series inductor. It also can be

tuned for a minimum current IOP into port 4. C3 is a DC blocking capacitor.

Since the input impedance of port 3 can be slightly negative at lower frequencies, the

source reflection coefficient should be kept below 0.8 (Z0 = 50 Ω) within this frequency

range.

The Conversion Noise Figure FSSB is corresponding with the value of Conversion Loss

LC. The LO signal must be clean of noise and spurious at the frequencies fLO ± fIF.

Data Sheet

6

2001-01-01

Share Link: