AM1DR Ver la hoja de datos (PDF) - AIMTEC
Número de pieza
componentes Descripción
Fabricante
AM1DR Datasheet PDF : 2 Pages
| |||
AM1DR Series
1 watt dc-dc converters
• 7PIN SIP PACKAGE
• REGULATED OUTPUT VOLTAGE
• LOW RIPPLE & NOISE
• HIGH EFFICIENCY UP TO 70%
• INPUT/OUTPUT ISOLATION: 1000 & 3000VDC
• OPERATING TEMPERATURE: -40°C ... +85°C
• PIN-COMPATIBLE WITH MULTIPLE MANUFACTURERS
GENERAL DESCRIPTION
Our AM1DR series is a family of cost effective 1W single
output isolated DC-DC converters. These converters
achieve low cost and ultra-miniature SIP7 pin size without
compromising performance and reliability.
Thirty models operates from input voltages of 5, 12 &
24VDC; producing regulated output voltage levels of
3.3, 5, 9, 12, 15VDC. Full SMD-design and a 100%
production test of parameters ensures a high reliability in
this product.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified
Input Specifications:
Voltage range
Filter
±10%
Capacitor
General Specifications:
Efficiency
Switching frequency
58% to 70%
125KHz, typ. 100% load
Isolation Specifications:
Rated voltage (60 sec)
Resistance
Capacitance
1000VDC
3000VDC
> 1000MOhm
60pF, typ.
Output Specifications:
Voltage accuracy
Ripple & noise (at 20MHz BW)
Short circuit protection
Line voltage regulation
Load voltage regulation
Temperature coefficient
±3%, max.
50 mVp-p, max.
Momentary
±0.5%, max.
±0.5%, max.
±0.02%/ºC, typ.
Environmental Specifications:
Operating temperature (ambient) -40°C ... +85°C
Storage temperature
-55°C ... +125°C
Case Temperature
+95°C, max.
Derating
None required
Humidity (non-condensing) Up to 90%
Cooling
Free-air Convection
Physical Specifications:
Dimensions
Weight
Case material
19.50x7.20x10.00mm
0.76x0.28x0.39inches
2.7g
Non-conductive black
plastic
MTBF: > 880,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25ºC)
Specifications are subject to change without notification
20
TO ORDER CALL 1-888-9-AIMTEC
Share Link: 