GL850 Ver la hoja de datos (PDF) - Genesys Logic

Número de pieza

componentes Descripción

Fabricante

GL850

USB 2.0 4-PORT HUB Controller

Genesys Logic 

GL850 USB 2.0 4-Port HUB Controller

CHAPTER 2 FEATURES

• Compliant to USB specification Revision 2.0

− 4 downstream ports

− Upstream port supports both high-speed (HS) and full-speed (FS) traffic

− Downstream ports support HS, FS, and low-speed (LS) traffic

− 1 control pipe (endpoint 0, 64-byte data payload) and 1 interrupt pipe (endpoint 1, 1-byte data

payload)

− Backward compatible to USB specification Revision 1.1

• On-chip 8-bit micro-processor

− RISC-like architecture

− USB optimized instruction set

− Dual cycle instruction execution

− Performance: 6 MIPS @ 12MHz

− With 64-byte RAM and 2K internal ROM

− Support customized PID, VID by reading external EEPROM

− Support downstream port configuration by reading external EEPROM

• Single Transaction Translator (TT) architecture

− Single TT shares the same TT control logics for all downstream port devices. This is the most cost

effective solution for TT

• Each downstream port supports two-color status indicator, with automatic and manual modes compliant to

USB specification Revision 2.0

• Support both individual and gang modes of power management and over-current detection for

downstream ports

• Conform to bus power requirements

• Automatic switching between self-powered and bus-powered modes

• Integrated USB2.0 transceiver

• 0.35um CMOS technology

• PLL embedded with external 12 MHz crystal

• Operate on 3.3 Volts

• Improved output drivers with slew-rate control for EMI reduction

• Internal power-fail detection for ESD recovery

• 64-pin LQFP package

• Applications:

− Stand-alone USB hub

− PC motherboard USB hub, Ducking of notebook

− Any compound device to support USB HUB function

©2000-2003 Genesys Logic Inc.—All rights reserved.

Page 10

Share Link: