612-91-306-41-001 Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
612-91-306-41-001 Datasheet PDF : 136 Pages
| |||
Product information
16
CONNECTOR WITH SPRING LOADED CONTACTS
Preci-Dip is introducing a new type of contact that can be proposed for connectors with very
high cycle count in the range of 10 000 or more. The electrical connection is made with a spring
loaded contact pin that is pressed against a fixed plate. The basic design is made to be easily
adapted to various requirements of contact force and stroke, contact pitch and height of the
connector.
Two different contact types are currently available:
s the original design for small pitch implementation down to 1.25 mm, and with solder tail
s a “very-low-profile” design with about 4.5 mm height with a working stroke of about 1mm;
the min pitch is 2.54 mm and SMD termination.
Typical field of application:
s mobile phone, radio telephone and other portable telecom equipment
s battery loader for appliance, audio and video equipment
s portable computer (note book) and portable data acquisition and processing equipment
s test equipment.
Availability:
Samples for evaluation and functional tests available now.
Custom specific connector with new housing and/or particular connection side, but with the
standard contact elements, please consult.
Contact with other specifications like stroke/force characteristics or electrical values on request.
Operating principle:
The electrical connection is made from the moving, spring actuated pin or plunger to the
fixed wiring end of the connector by a multifinger sliding contact . The moving contact pin
is actuated by a compression spring assuring pressure against the fixed contact counterpart .
Parts to are fixed together by the plastic connector housing . Standard wiring is for PCB
through hole soldering, but SMD version will be available.
Operating
Non operating
Share Link: 