2. Absolute Maximum Ratings
T460HW03 VF Product Specification
Rev. 1.0
The followings are maximum values which, if exceeded, may cause faulty operation or damage to the unit
Item
Logic/LCD Drive Voltage
Input Voltage of Signal
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Panel Surface Temperature
Symbol
Min
Vcc
-0.3
Vin
-0.3
TOP
0
HOP
10
TST
-20
HST
10
PST
-
Max
Unit
Conditions
14
[Volt]
Note 1
4
[Volt]
Note 1
+50
[oC]
Note 2
90
[%RH]
Note 2
+60
[oC]
Note 2
90
[%RH]
Note 2
65
[oC]
Note 3
Note 1: Duration:50 msec.
℃ Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
℃ The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures
℃ ℃ greater than 40 , the wet bulb temperature must not exceed 39 .
℃ Note 3: Surface temperature is measured at 50 Dry condition
© Copyright AUO Optronics Corp. 2009 All Rights Reserved.
Page 5 / 29