T460HW03-V1 Ver la hoja de datos (PDF) - AU Optronics
Número de pieza
componentes Descripción
Fabricante
T460HW03-V1 Datasheet PDF : 31 Pages
| |||
3. Electrical Specification
The T460HW03 V1 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input, which powers the CCFL, is typically generated by an integrate
power (I/P) system.
3.1 Electrical Characteristics
Parameter
Symbol
Power Supply Input Voltage
Power Supply Input Current
Power Consumption
Inrush Current
Differential Input
High Threshold
Voltage
LVDS
Differential Input
Interface
Low Threshold
Voltage
Common Input
Voltage
Input High
CMOS
Threshold Voltage
Interface
Input Low
Threshold Voltage
Backlight Power Consumption (ref.)
Life Time
VDD
IDD
PC
IRUSH
VTH
VTL
VCIM
VIH
(High)
VIL
(Low)
PBL
Min.
10.8
--
--
--
--
-100
1.10
2.4
0
--
50000
Value
Typ.
12.0
1.35
16.2
--
--
--
1.25
--
--
210
--
Max
13.2
1.5
19.8
4.5
+100
--
1.40
3.3
0.7
--
--
Unit Note
VDC
A
1
Watt
1
A
5
mVDC
4
mVDC
4
VDC
VDC
VDC
Watt
2
Hours 3
The performance of the Lamp in LCD panel, for example life time or brightness, is extremely influenced by
the characteristics of the balance board and I/P board. All the parameters should be carefully designed as
not to produce too much leakage current from high-voltage output. While design or order balance board,
please make sure unwanted lighting caused by the mismatch of the lamp and balance board (no lighting,
flicker, etc) never occurs. After confirmation, the LCD Panel should be operated in the same condition as
installed in your instrument.
©Copyright AU Optronics Corp.
2007 All Rights Reserved.
T460HW03 V1
7/31
No Reproduction and Redistribution Allowed
Share Link: 