MDP14000000FD04 Ver la hoja de datos (PDF) - Vishay Semiconductors
Número de pieza
componentes Descripción
Fabricante
MDP14000000FD04 Datasheet PDF : 5 Pages
| |||
www.vishay.com
MDP 01, 03, 05
Vishay Dale
PERFORMANCE
TEST
Power Conditioning
Thermal Shock
CONDITIONS
1.5 rated power, applied 1.5 h “ON” and 0.5 h “OFF” for 100 h
± 4 h at +25 °C ambient temperature
5 cycles between -65 °C and +125 °C
MAX. R
(TYPICAL TEST LOTS)
± 0.50 % R
± 0.50 % R
Short Time Overload
2.5 x rated working voltage 5 s
± 0.25 % R
Low Temperature Operation
45 min at full rated working voltage at -65 °C
± 0.25 % R
Moisture Resistance
240 h with humidity ranging from 80 % RH to 98 % RH
± 0.50 % R
Resistance to Soldering Heat
Leads immersed in +350 °C solder to within 1/16" of device body for 3 s
± 0.25 % R
Shock
Total of 18 shocks at 100 g’s
± 0.25 % R
Vibration
Load Life
Terminal Strength
12 h at maximum of 20 g’s between 10 Hz and 2000 Hz
1000 h at +70 °C, rated power applied 1.5 h “ON,
0.5 h “OFF” for full 1000 h period. Derated according to the curve.
4.5 pound pull for 30 s
± 0.25 % R
± 1.00 % R
± 0.25 % R
Insulation Resistance
10 000 M (minimum)
-
Dielectric Withstanding Voltage
No evidence of arcing or damage (200 VRMS for 1 min)
-
Revision: 12-Sep-13
4
Document Number: 31511
For technical questions, contact: ff2aresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Share Link: 